Sway Bar Link - 1ASSL00115

Specifications:

• Fits either the LH (Driver Side) or RH (Passenger Side) FRONT
  
• Kit includes (1) Link Assembly as shown
• Direct replacement
• Built to strict quality control standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

step : Removing the Wheel (0:42)

• Loosen the lug nuts with a 21mm socket with the vehicle on the ground
• Raise the vehicle with a floor jack
• Secure the vehicle on jack stands
• Remove the lug nuts
• Pull off the wheel

step : Removing the Front Sway Bar Links (1:29)

• Clean off any rust from the nut with a wire brush
• Spray the rusty parts with rust penetrant
• Break the nuts free with a 14mm wrench
• Counter-hold with a 5mm Allen bit
• Remove the upper nut with a 14mm wrench
• Counter-hold with a 5mm Allen key
• Remove the lower nut with a 14mm wrench

step : Installing the Front Sway Bar Links (5:15)

• Insert the sway bar link into place
• Tighten the nuts with a 15mm wrench (bottom nut first)
• Counter-hold with a 5mm Allen bit
• Torque the bolts to 40 foot-pounds

step : Reattaching the Wheel (7:27)

• Slide the wheel into place
• Start the lug nuts by hand
• Tighten the lug nuts preliminarily
• Lower the vehicle to the ground
• Tighten the lug nuts to 87 foot-pounds in a crossing or star pattern