Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item the end links are. Over time ball joint ends can wear causing loose connections, or even come apart and fall off.

Specifications:

  • Comes as a SET of 4
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT & REAR
  • Direct replacements
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. These links make great replacements and offer good cost savings over the dealer parts.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:18)
    • Pull off the hub cap by hand
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Links (1:44)
    • Attach locking pliers to the upper sway bar ball joint
    • Remove the upper sway bar link nut with a 14mm socket and ratchet
    • Remove the locking pliers
    • Attach locking pliers to the lower joint
    • Remove the lower sway bar link nut with a 14mm socket and ratchet
    • Remove the sway bar link
    • Remove the locking pliers
  3. step : Installing the Sway Bar Links (3:34)
    • Remove the 17mm nuts from the new sway bar link
    • Put the sway bar link into place
    • Start the 17mm nuts onto the sway bar link
    • Attach locking pliers to the upper sway bar ball joint
    • Tighten the upper nut to 29 foot-pounds of torque
    • Attach locking pliers to the lower joint
    • Tighten the lower nut to 29 foot-pounds of torque
  4. step : Reattaching the Wheel (4:24)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 17mm Socket
  • 14mm Socket

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
0
0
0
0
Sway Links
These were much less expensive from 1A and of superior quality compared to O Riely or Toyota. Recommend 1A.
BTW...when others tell you theirs is a lifetime guarantee...guess what...so is 1A.
January 25, 2017
Purchased
1 year ago
Great quality and cheap
Quality:
When I received the sway bars, one of them was faulty (had grease leakage). I contacted the customer service and they send me another one without asking me to return the faulty item.
Very cheap compared to Autozone, O'reily, etc. and yet high quality.

Installation:
In the 1aauto's How-To video, the guy suggests using Vise Grip Pliers (why???) to fix the bolt and then open the nut. This can harm the sway sealings. The bolt can be fixed easily using an Allen Wrench.
November 17, 2017
Purchased
3 months ago
A+ Transaction
Fast and easy. And Always sending me the right parts.
October 24, 2017
Purchased
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 5 answers
Having issues with all 4 tires popping as I drive now after installing these - why would this happen?
David on Jun 10, 2017
BEST ANSWER: Now that you've replaced the end links, the sway bar may be moving more while driving. Check for play in the bushings that hold the sway bar. There should be some give in the material, but there should not be any gap. If you pull on the sway bar it should move very little in the bushing. Also, double check all your work and make sure that you installed the links correctly. If the hardware is loose on the link it may also make a noise.
Is the front pair in this set of four the same as the front pair of 1ASFK00230? Thanks
KwanP on Jul 4, 2017
BEST ANSWER: Yes, the front links in this set are the same that are in 1ASFK00230!

How-to Video:

(05:06 min)

Tools List:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 17mm Socket
  • 14mm Socket



This part replaces:

  • OE # 4881033010
  • OE # 4883033010
  • OE # 4883007010
  • OE # 4881006030
  • OE # 4882006030
  • OE # 4883006020
  • Moog K90313
  • Moog K90311
  • Moog K90312
  • OE # 48830-06020
  • OE # 4881006030, 4881033010

Vehicle Fit

  • 1997-2001 Lexus ES300 Front & Rear Sway Bar Link 4 Piece Set
  • 1999-2003 Lexus RX300 Front & Rear Sway Bar Link 4 Piece Set Front Wheel Drive
  • 1997-2004 Toyota Avalon Front & Rear Sway Bar Link 4 Piece Set
  • 1997-2000 Toyota Camry Front & Rear Sway Bar Link 4 Piece Set
  • 2001 Toyota Camry Front & Rear Sway Bar Link 4 Piece Set L4 2.2L (Built Before 7/01 Production Date)
  • 2001 Toyota Camry Front & Rear Sway Bar Link 4 Piece Set V6 3.0L
  • 1999-2002 Toyota Solara Front & Rear Sway Bar Link 4 Piece Set
  • 2003 Toyota Solara Front & Rear Sway Bar Link 4 Piece Set (Built Before 6/03 Production Date)
Part #: 1ASFK01989

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More