Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item the end links are. Over time the ball and socket joints can wear causing loose connections, or even come apart and fall off.

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side)
      • FRONT or REAR as listed per application
  • Replaces dealer part numbers: YL8Z5K483AA, EC0134150A, YL8Z 5K483 AA, EC01 34150 A
  • Connects sway bar to control arm
  • Direct replacements
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. These links make great replacements and offer good cost savings over the dealer parts.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the top of the shock (1:02)
    • Pop the hood and apply penetrating oil to the top four bolts.
    • Use a 14 mm socket and ratchet to remove the nuts.
  2. step : Remove the wheel (1:35)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and the tire
  3. step : Remove the bottom part of the strut (1:52)
    • Apply penetrating oil to your 10 mm brake line bracket bolt, 14mm Stabilizer link bolt and two 18 mm strut bolts.
    • Unbolt the brake line bracket bolt, and then use your 5 mm Allen wrench to stabilize the bolt and work the nut loose with your 14 mm wrench or socket.
    • Continue to loosen, apply penetrating oil, tighten, loosen, apply penetrating oil and repeat until you work it loose.
    • Use a breaker bar or pipe and ratchet to remove the 18 mm bolts.
  4. step : Install the new strut (7:00)
    • Position your strut into place and thread your 6 nuts on.
    • Torque the top four 14mm bolts to 35 ft lbs.
    • Tighten and torque the bottom two bolts to 85 ft lbs.
    • Bolt your stabilizer link back in as well as your brake line bracket.
    • Use your 14 mm socket, ratchet and 5 mm Allen wrench to install the stabilizer link.
    • The brake line bracket can be reinstalled with a 10 mm socket and ratchet.
  5. step : Put the wheel back on (9:50)
    • Replace the wheel and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Floor Jack
  • Large Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 12mm Socket
  • 13mm Socket
  • 11mm Socket
  • 14mm Socket
  • 18mm Socket
  • 19mm Socket
  • 17mm Socket
  • 10mm Socket
  • 16mm Socket

  • Wrenches - Metric

  • 16mm Wrench
  • 15mm Wrench
  • 17mm Wrench
  • 13mm Wrench
  • 12mm Wrench
  • 19mm Wrench
  • 10mm Wrench
  • 18mm Wrench
  • 14mm Wrench
  • 11mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2004Ford Escape Ford Escape Sway Bar Link Front Pair
1995-1998Mazda Protege Mazda Protege Sway Bar Link Rear Pair
2001-2004Mazda Tribute Mazda Tribute Sway Bar Link Front Pair
Part #: 1ASFK00246


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:29 min)