Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item the end links are. Over time the ball joint ends can wear causing loose connections, or even come apart and fall off.

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) REAR
  • Direct replacements
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. These links make great replacements and offer good cost savings over the dealer parts.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (1:18)
    • Pull off the hub cap by hand
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Links (1:44)
    • Attach locking pliers to the upper sway bar ball joint
    • Remove the upper sway bar link nut with a 14mm socket and ratchet
    • Remove the locking pliers
    • Attach locking pliers to the lower joint
    • Remove the lower sway bar link nut with a 14mm socket and ratchet
    • Remove the sway bar link
    • Remove the locking pliers
  3. step : Installing the Sway Bar Links (3:34)
    • Remove the 17mm nuts from the new sway bar link
    • Put the sway bar link into place
    • Start the 17mm nuts onto the sway bar link
    • Attach locking pliers to the upper sway bar ball joint
    • Tighten the upper nut to 29 foot-pounds of torque
    • Attach locking pliers to the lower joint
    • Tighten the lower nut to 29 foot-pounds of torque
  4. step : Reattaching the Wheel (4:24)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 17mm Socket
  • 14mm Socket

5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Great Company!!
Great product and shipping was on time. I would definitely order here again!!
June 29, 2017
sway bar link
went on with no problem,fits great and at a great price. Thank you A1 Auto.
October 1, 2017
perfect
These are easy to install and make a difference in the handling. One note, you can use an allen wrench on these instead of holding with vicegrips, unlike the original ones. Its pretty easy to mangle the boot with grips. I had to cut away the old one to actually get a purchase one it.
October 15, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Are these pre greased?
Darwin T August 25, 2016
Theres no fitting for grease, I installed them right out of the box. They work great, were easy to install and at a fraction of the price Toyota wanted.
Gerald B August 25, 2016
Yes
Joseph D August 25, 2016
Yes
Brian F August 25, 2016
they are pregreased and sealed
Ron S August 25, 2016
Yes but you cant grease them. Got 159000 out of oem ones lol
Patricia E August 25, 2016
Year Make Model Description
1992-2001Lexus ES300 Lexus ES300 Rear Sway Bar Link Pair
1999-2003Lexus RX300 Lexus RX300 Rear Sway Bar Link Pair Front Wheel Drive
2003-2004Saturn Ion Saturn Ion Rear Sway Bar Link Pair
1995-2004Toyota Avalon Toyota Avalon Rear Sway Bar Link Pair
1992-2001Toyota Camry Toyota Camry Rear Sway Bar Link Pair
1999-2003Toyota Solara Toyota Solara Rear Sway Bar Link Pair
Part #: 1ASFK00223


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:06 min)