Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Front or Rear Location:   Rear

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item, the end links & frame bushings are.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Replaces dealer part numbers: 10320234, 10415034
  • Direct replacements
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. These links make great replacements and offer good cost savings over the dealer parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:38)
    • Loosen the lug nut covers with a 19mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:03)
    • Place a 14mm wrench to hold the back
    • Remove the nut with an 18mm socket
    • Remove the sway bar link
  3. step : Installing the New Sway Bar Link (1:41)
    • Push the sway bar link into place
    • Replace and tighten the 18mm nuts
  4. step : Reattaching the Wheel (2:03)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench

5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Tight rear end
I replaced these along with my rear sway bar and the difference is night and day! install was easy. These are much bigger and stronger than OEM
April 23, 2017
tie rods and sway bars
I am real happy with the products I purchased. They have been installed and are working perfect. Plus I saved $92. Was real happy at not having to pay shipping and time it took to get here. Will get all my parts
August 29, 2018
Fit
Perfect replacement for a 200k minivan. Inexpensive and easy to install.
October 25, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
08 impala I replaced the inner and outer tie rod on driver side and still ! Its like the outer is still need to be placed still had a loud clicking sound ! Everything is in the right place what could it be?
Albert T March 13, 2017
If the loud clicking sound is when you are turning then it is more than likely a bad Trans Axle. These are very easy to replace on the Impala. I would also recommend a full rebuild on that side since you will have everything taken apart.
Kevin M March 13, 2017
Check and see if your sway bar is cracked. Mine was same symptoms.
RAMON R. B March 13, 2017
I would recommend taking your vehicle to a reputable garage and have them diagnose the issue.
Tim K March 15, 2017
U have to change the ball joints thats the problem and sway bar links front make sure u buy the controls arms with ball joints and bushings and u will not hear that noise any more thank u
Jose. E. C December 15, 2017
What are the dimensions of the rear sway bar link for a Pontiac Grand Prix 2007? I need distance from hole to hole on center.
Rick M December 14, 2017
I dont have the exact measurements. Our parts are designed to be exact replacements for what came with the vehicle, so as long as your year, make, and model match up with our listing, these will definitely fit and function just like the original. Please let us know if you have any other questions.
Adam G December 14, 2017
I dont know . I had a 1998 grand prix.
Joseph D December 15, 2017
Yes u do hole to hole on center I hope answer and it help thank u and once u have the sway bar links on u feel the different thank u
Jose. E. C December 15, 2017
Year Make Model Description
2005-2008Buick Allure Buick Allure Rear Sway Bar Link Pair
1997-2005Buick Century Buick Century Rear Sway Bar Link Pair
2005-2009Buick LaCrosse Buick LaCrosse Rear Sway Bar Link Pair
1997-2004Buick Regal Buick Regal Rear Sway Bar Link Pair
2000-2013Chevy Impala Chevy Impala Rear Sway Bar Link Pair
2000-2007Chevy Monte Carlo Chevy Monte Carlo Rear Sway Bar Link Pair
1998-2002Oldsmobile Intrigue Olds Intrigue Rear Sway Bar Link Pair
1997-2008Pontiac Grand Prix Pontiac Grand Prix Rear Sway Bar Link Pair
Part #: 1ASFK01435


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:09 min)