Sway Bar Link Pair - 1ASFK03437

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair


  • Brand New Sway Bar End Link
  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:55)
    • Loosen the five 19mm lug nuts
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull the wheel off the hub
  2. step : Removing the Sway Bar Link (1:28)
    • Apply rust penetrant to the sway bar link
    • Allow the rust penetrant to soak in
    • Remove the 15mm nut from the top of the sway bar link
    • Remove the top sway bar bushing with locking pliers
    • Hold the sway bar link sleeve with locking pliers
    • Remove the 16mm nut from the bottom of the sway bar link
    • Remove the bushing from the tip of the sway bar link
    • Drive the link out of the sleeve with a hammer and punch
  3. step : Installing the Sway Bar Link (4:41)
    • Support the control arm underneath the strut with a jack
    • Thread a washer onto the sway bar link
    • Thread a bushing onto the sway bar link
    • Thread the sway bar link through the control arm
    • Thread a bushing onto the sway bar link
    • Thread a washer onto the sway bar link
    • Slide the sleeve onto the control arm
    • Thread a washer onto the sway bar link
    • Thread a bushing onto the sway bar link
    • Thread the sway bar link into the sway bar
    • Drive the sway bar link through the sleeve with a hammer and socket
    • Thread a bushing onto the sway bar link
    • Thread a washer onto the sway bar link
    • Set the suspension to ride height with the jack
    • Tighten the 15mm nut and bolt
    • Tighten the nut to 22 foot-pounds of torque
    • Lower the jack
  4. step : Installing the Wheel (6:45)
    • Slide on the wheel
    • Start the five lug nuts
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Center Punch
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 19mm Socket
  • 16mm Socket
  • 15mm Socket

5.00/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Two thumbs up - AGAIN!!
The parts arrived timely and fit/worked perfectly. As always, Im very pleased with my order from 1aauto. I only pay a fraction of the price of supply stores and Ill recommend the site to anyone who asks me about locating less expensive auto parts.
February 16, 2017
Great product,,,
Easy to install after watching your awesome informative video!!!
December 8, 2017
Replaced shot OEM links with 1As. They fit perfectly, went on quickly, and are better than the OEMs Very happy...quick ship...and a great price.
April 16, 2018
Sway bar links
My wife was complaining about the handling on her 2006 Explorer. I did a check and found a broken link on her rear sway bar. Ive dealt with 1A before, and when I saw the price on the parts, I ordered them immediately. The parts arrived promptly, and were much easier to install than the factory parts were to remove. Im good hubby again, at least for now. Thank you 1A, will be ordering new front struts for her vehicle very soon!
October 20, 2018
Excelllent Service
It was definitely easy to search for and order the parts that I needed. The parts were shipped same day ordered and actually received a day early than forecasted. I will definitely use 1A Auto in any future parts needed.
December 21, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2006-2010Ford Explorer Ford Explorer Rear Sway Bar Link Pair
2007-2010Ford Explorer Sport Trac Ford Explorer Sport Trac Rear Sway Bar Link Pair
2006-2010Mercury Mountaineer Mercury Mountaineer Rear Sway Bar Link Pair
Part #: 1ASFK03437

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:32 min)