Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

MOOG K7275 [FRONT SWAY BAR LINK KIT]

This Moog brand replacement FRONT Sway Bar Link kit is just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Your front sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item the end links are. Over time the ball & socket joints can wear causing loose connections, or even come apart and fall off.

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Kit includes (1) Link Assembly as shown
  • Replaces one of many dealer part numbers including: 2L2Z-5K483-BA, 2L2Z-5K483-AA, 2L2Z-5K483-A, 6L2Z-5K483-AA, 2L2Z5K483BA, 2L2Z5K483AA, 2L2Z5K483A, 6L2Z5K483AA, 52038115, 52038116, 52037916, 52037712AB
  • Connects sway bar to control arm
  • Direct replacement
  • Built to strict quality control standards

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:45)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:09)
    • Hold the sway bar link stud with a 16mm wrench
    • Remove the 15mm nut from the sway bar link
    • If the sway bar link is broken, fill the tube with rust penetrant
    • Hold the tube with vise grip pliers
    • Loosen the sway bar link stud with a 16mm socket and ratchet
    • Pull off the plastic tube
    • Remove any remaining plastic with a hammer and chisel
    • Loosen the sway bar link stud with a 16mm socket and ratchet
    • Push out the stud with a hammer
  3. step : Installing the Sway Bar Link (2:55)
    • Lift the opposite side of the vehicle with a jack
    • Put a washer onto the sway bar link stud
    • Put on a bushing
    • Put the sway bar link into place, through the control arm
    • Put on a bushing
    • Put on a washer
    • Put on the plastic tube
    • Put on a washer
    • Put on a bushing
    • Put the sway bar link into place, through the sway bar
    • Put on a bushing
    • Put on a washer
    • Thread on the 16mm nut
    • Tighten the nut preliminarily
    • Lower the jack
    • Support the suspension at ride height with a jack
    • Tighten the 16mm nut until the bushings are the same thickness as the washers
  4. step : Reattaching the Wheel (4:31)
    • Clip the ABS sensor wiring into place
    • Wipe down the rotor
    • Remove the placeholder lug nut
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Chisel
  • Jack Stands
  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • Ratchet

  • Sockets - Metric

  • 16mm Socket
  • 15mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 16mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1994-2001Dodge Ram 1500 Truck Dodge Ram 1500 Truck Rear Wheel Drive Front Sway Bar Link for Models with Independent Front Suspension MOOG K7275
1994-2002Dodge Ram 2500 Truck Dodge Ram 2500 Truck Rear Wheel Drive Front Sway Bar Link for Models with Independent Front Suspension MOOG K7275
1994-2002Dodge Ram 3500 Truck Dodge Ram 3500 Truck Rear Wheel Drive Front Sway Bar Link for Models with Independent Front Suspension MOOG K7275
1995-2010Ford Explorer Ford Explorer Front Sway Bar Link MOOG K7275
2001-2010Ford Explorer Sport Trac Ford Explorer Sport Trac Front Sway Bar Link MOOG K7275
1998-2011Ford Ranger Ford Ranger Front Sway Bar Link MOOG K7275
2001-2008Mazda B2300 Truck Mazda B2300 Truck Front Sway Bar Link MOOG K7275
1998-2001Mazda B2500 Truck Mazda B2500 Truck Front Sway Bar Link MOOG K7275
1998-2007Mazda B3000 Truck Mazda B3000 Truck Front Sway Bar Link MOOG K7275
1998-2008Mazda B4000 Truck Mazda B4000 Truck Front Sway Bar Link MOOG K7275
1997-2010Mercury Mountaineer Mercury Mountaineer Front Sway Bar Link MOOG K7275
Only 1 left in stock
Part #: 1ASMX00041


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

MOOG
Brand #: K7275

How-to Video:

(05:33 min)