Part Details

  • Front or Rear Location: Front

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item the end links are. Over time the ball & socket joints can wear causing loose connections, or even come apart and fall off.

Specifications:

  • Fits the LH (Driver Side) FRONT
  • Replaces dealer part number: 54668-2Y000, 546682Y000
  • Direct replacement
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. This link makes a great replacement and offers good cost savings over the dealer part.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:58)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Stabilizer Link (1:17)
    • Hold the lower sway bar link stud with a 14mm wrench
    • Remove the lower nut from the sway bar link with a 15mm socket and ratchet
    • Hold the upper sway bar link stud with a 14mm wrench
    • Remove the upper nut from the sway bar link with a 15mm socket and ratchet
    • Pull off the stabilizer link
  3. step : Installing the Stabilizer Link (2:54)
    • Hold the lower sway bar link stud with a 14mm wrench
    • Tighten the lower 15mm nut onto the stabilizer link
    • Hold the upper sway bar link stud with a 14mm wrench
    • Tighten the upper 15mm nut onto the stabilizer link
  4. step : Reattaching the Wheel (4:05)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Ratchet

  • Sockets - Metric

  • 15mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 14mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2000-2001Infiniti I30 Infiniti I30 Front Sway Bar Link Driver Side
2002-2004Infiniti I35 Infiniti I35 Front Sway Bar Link Driver Side
1999Nissan Maxima Nissan Maxima Front Sway Bar Link Driver Side (Built After 4/99 Production Date)
2000-2003Nissan Maxima Nissan Maxima Front Sway Bar Link Driver Side

This part replaces:

  • Moog K90432
  • OE # 546682Y000
  • OE # 54668-2Y000
Part #: 1ASSL00091


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:45 min)