These replacement sway bar links are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item the end links are. Over time the ball & socket joints can wear causing loose connections, or even come apart and fall off.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 12479075, 12479076, 12479231, 12479233
  • Direct replacements
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. These links make great replacements and offer good cost savings over the dealer parts.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:46)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:09)
    • Apply penetrating oil to the sway bar link nuts
    • Clean the sway bar link studs with a flat blade screwdriver, if necessary
    • Put a 4.5mm Allen wrench into the lower sway bar link stud
    • Remove the lower 18mm nut from the sway bar link
    • Put a 4.5mm Allen wrench into the upper sway bar link stud
    • Remove the upper 18mm nut from the sway bar link
    • Pull off the sway bar link
    • If necessary, cut the way bar link stud with a reciprocating saw, holding the sway bar in place with a pry bar and jack
  3. step : Installing the New Sway Bar Link (3:03)
    • Put the grease fittings onto the new sway bar link
    • Tighten the grease fittings with a 7mm socket and ratchet
    • Push the sway bar studs into place
    • Thread the two 18mm nuts onto the sway bar link by hand
    • Tighten the two 18mm nuts, holding the studs with a 17mm wrench
  4. step : Reattaching the Wheel (4:17)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    Allen Wrenches

  • 4.5mm Allen Wrench

  • General Tools

  • Jack Stands
  • Floor Jack
  • Sawzall

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 19mm Socket
  • 7mm Socket

  • Wrenches - Metric

  • 18mm Wrench
  • 17mm Wrench

4.7 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
1
0
0
0
Was perfect fit. My envoy rides like new again just by replacing both sway bars.!
March 30, 2018
Purchased
3 months ago
sway bar
the end links fit like a dream and mounted so easy TY
August 17, 2017
Purchased
10 months ago
Sway bar links - perfect fit
They fit perfectly. I had to install the top and bottom bolts at the same time to be able to get them in but otherwise it went perfectly. I would recommend these to someone looking for an affordable replacement part.
October 3, 2017
Purchased
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2003 Chevy Trailblazer Front Sway Bar Link Pair
  • 2003 Chevy Trailblazer EXT Front Sway Bar Link Pair
  • 2002-2003 GMC Envoy Front Sway Bar Link Pair
  • 2003 GMC Envoy XL Front Sway Bar Link Pair
  • 2003 Isuzu Ascender Front Sway Bar Link Pair
  • 2002-2003 Olds Bravada Front Sway Bar Link Pair

This part replaces:

  • Moog K6666
  • Moog K6665
Part #: 1ASFK01067

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(05:07 min)