Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item, the end links & frame bushings are.

Specifications:

  • Fits either the LH (Driver Side) or RH (Passenger Side) REAR
  • Replaces dealer part numbers: 48830-06030, 48830-48010, 4883006030, 4883048010
  • Direct replacement
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. This link makes a great replacement and offers good cost savings over the dealer part.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:24)
    • Pry off the hub cap with a pry bar
    • Loosen the lug nuts with the vehicle on the ground
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull the wheel off the hub
  2. step : Removing the Sway Bar Link (1:15)
    • Spray rust penetrant on the upper sway bar link nut
    • Clean the upper sway bar link nut with a wire brush
    • Hold the upper sway bar link nut with a 6mm hex socket and breaker bar
    • Loosen the nut with a 17mm wrench
    • If the nut is stuck, hold the sway bar link ball joint with locking pliers if necessary
    • Remove the 17mm nut
    • If the nut remains stuck, cut the sway bar link stud with a hack saw or reciprocating saw
    • Hold the lower sway bar link ball joint with locking pliers
    • Remove the 17mm bolt from the lower sway bar link stud
    • Remove the sway bar link from the vehicle
  3. step : Installing the Sway Bar Link (7:54)
    • Hang the sway bar link where it attaches to the strut
    • Slide the sway bar link stud into sway bar
    • Start the 18mm nuts onto the sway bar link studs by hand
    • Hold the sway bar link ball joints with an 18mm wrench
    • Tighten the nuts with an 18mm socket and ratchet
    • Torque the 18mm nuts to 55 foot-pounds
  4. step : Installing the Wheel (8:52)
    • Slide the wheel onto the hub
    • Start the lug nuts by hand, with the tapered side facing the wheel
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Torque the lug nuts to 76 foot-pounds in a star pattern
    • Line up the hub cap with the valve stem
    • Push the hub cap onto the wheel

Tools needed for replacement:

    Allen Wrenches

  • 6mm Allen Wrench

  • General Tools

  • Jack Stands
  • Sawzall
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 17mm Socket
  • 18mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 17mm Wrench
  • 18mm Wrench
  • 21mm wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2003 Lexus ES300 Rear Sway Bar Link Driver or Passenger Side
  • 2013-2017 Lexus ES300h Rear Sway Bar Link Driver or Passenger Side
  • 2004-2006 Lexus ES330 Rear Sway Bar Link Driver or Passenger Side
  • 2013-2017 Lexus ES350 Rear Sway Bar Link Driver or Passenger Side
  • 2004-2006 Lexus RX330 Rear Sway Bar Link Driver or Passenger Side
  • 2007-2009 Lexus RX350 Rear Sway Bar Link Driver or Passenger Side
  • 2006-2008 Lexus RX400h Rear Sway Bar Link Driver or Passenger Side
  • 2005 Toyota Avalon Rear Sway Bar Link Driver or Passenger Side
  • 2006 Toyota Avalon (Built After 2/06 Production Date) Rear Sway Bar Link Driver or Passenger Side
  • 2013-2016 Toyota Avalon Rear Sway Bar Link Driver or Passenger Side
  • 2002-2006 Toyota Camry Rear Sway Bar Link Driver or Passenger Side
  • 2012-2017 Toyota Camry Rear Sway Bar Link Driver or Passenger Side
  • 2001-2003 Toyota Highlander 2 Wheel Drive Rear Sway Bar Link Driver or Passenger Side
  • 2004-2013 Toyota Highlander Rear Sway Bar Link Driver or Passenger Side
  • 2004-2008 Toyota Solara Rear Sway Bar Link Driver or Passenger Side
  • 2009-2016 Toyota Venza Rear Sway Bar Link Driver or Passenger Side

This part replaces:

  • OE # 48830AA010
  • OE # 4883048010
  • OE # 488300
  • Moog K90345
Part #: 1ASSL00234

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(10:10 min)