Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item the frame bushings are.

Specifications:

  • Comes as a PAIR
    • Fits the REAR sway bar
    • Includes 2 bushings (frame mounted)
  • Replaces dealer part numbers: 48818-06090, 4881806090
  • Direct replacements
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the bushings. These make great replacements and offer good cost savings over the dealer parts.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:09)
    • Pull off the hub cap by hand
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Bushings (1:34)
    • Remove the two 12mm bolts from the sway bar bracket
    • Pull off the bracket
    • Pull off the sway bar bushing
    • Repeat these steps on the other side
  3. step : Installing the Sway Bar Bushing (3:46)
    • Split the sway bar bushing
    • Push it onto the sway bar
    • Lift the sway bar bracket into place
    • Clip on the sway bar bracket
    • Insert the two 12mm bolts into the sway bar bracket
    • Repeat these steps on the other side
    • Tighten the two 12mm bolts into each bracket to 14 foot-pounds of torque
  4. step : Reattaching the Wheel (4:35)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 12mm Socket

4.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
1
0
0
0
Sway Bar Bushings
No great savings here...convenient to order from IA...same price as O Riely of other parts houses.
January 25, 2017
Purchased
1 year ago
Perfect fit
Identical replacement for the originals. Slid right into place
April 28, 2018
Purchased
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-2001 Lexus ES300 Rear Sway Bar Bushing Pair
  • 2004-2006 Lexus RX330 Rear Sway Bar Bushing Pair
  • 2007-2008 Lexus RX350 Rear Sway Bar Bushing Pair
  • 1997-1999 Toyota Avalon Rear Sway Bar Bushing Pair
  • 1997-1999 Toyota Camry Rear Sway Bar Bushing Pair
  • 2000-2001 Toyota Camry Rear Sway Bar Bushing L4 2.2L Models Pair
  • 2001-2003 Toyota Highlander Rear Sway Bar Bushing Pair
  • 1999-2003 Toyota Solara Rear Sway Bar Bushing Pair

This part replaces:

  • OE # 4881806090
  • Moog K90547
  • OE # 48818-06090
Part #: 1ASMX00093

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(05:18 min)