Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item, the end links & frame bushings are.

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Mounts in the sway bar brackets
  • Direct replacements
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the frame bushings. These bushings make great replacements and offers good cost savings over the dealer parts.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:14)
    • Loosen the lug nuts with your lug wrench.
    • Raise and secure the car.
    • Remove the lug nuts and remove the wheel.
  2. step : Remove the stabilizer link (1:35)
    • Spray the bolts with penetrating oil
    • Use a 5mm Allen wrench and an 18 mm wrench to remove the nut and bolt on the stabilizer link.
    • Repeat on the bottom.
    • Use a Sawzall to remove the stabilizer link if it is rusted on there.
    • You can rent a Sawzall at a home improvement supply store.
  3. step : install the new stabilizer links (6:20)
    • Put the stabilizer link in place and use your wrench to bolt the locking lug nuts on.
  4. step : Put the wheel back on (7:38)
    • Hand-tighten the lug nuts and then lower the car.
    • Refer to the owner’s manual to torque the lug nuts to the correct ft lbs.
    • Use a star pattern.

Tools needed for replacement:

    Allen Wrenches

  • 5/16 Inch Allen Wrench

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Wrenches - SAE

  • 3/4 Inch Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000 Chrysler Grand Voyager Front Sway Bar Bushing Pair
  • 1996-2000 Chrysler Town & Country Front Sway Bar Bushing Pair
  • 2000 Chrysler Voyager Front Sway Bar Bushing Pair
  • 1996-2000 Dodge Caravan Front Sway Bar Bushing Pair
  • 1996-2000 Dodge Grand Caravan Front Sway Bar Bushing Pair
  • 1996-2000 Plymouth Grand Voyager Front Sway Bar Bushing Pair
  • 1996-2000 Plymouth Voyager Front Sway Bar Bushing Pair

This part replaces:

  • OE # 4684890
  • Moog K7350
Only 2 left in stock
Part #: 1ASMX00340

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(07:55 min)