Replaces

Suzuki Heater Blower Motor with Fan Cage - 1AHCX00300

This heater blower motor with fan cage is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order!

Specifications:

  • New, not remanufactured or rebuilt
  • Includes blower motor fan cage impeller already installed
  • Direct replacement
  • Replaces dealer part numbers: 74250-65D11, 7425065D11
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory

If you are experiencing intermittent stopping during use, squealing noise from bearings, or poor air flow from your dash vents this may be your solution.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Blower Control Module (0:40)
    • Pry the two plastic clips from the access panel with a flat blade screwdriver
    • Pull off the access panel
    • Unclip the control module wiring from the control module bracket
    • Disconnect the blower control module wiring harnesses
    • Remove the front two 10mm bolts from the control module
    • Loosen the back left 10mm bolt from the control module
    • Pull down the control module
  2. step : Removing the Blower Motor (2:12)
    • Disconnect the blower motor wiring harness
    • Remove the three 8mm bolts from the blower motor
    • Pull out the blower motor wiring clips
    • Twist the blower motor to make it easier to pull out
    • Pull the blower motor down and out
  3. step : Installing the New Blower Motor (3:35)
    • Put the new blower motor into place
    • Insert the three 8mm bolts into the blower motor
    • Reconnect the blower motor wiring harness
    • Push in the blower motor wiring clips
  4. step : Reinstalling the Blower Control Module (4:37)
    • Put the control module into place
    • Insert the three 10mm bolts into the control module
    • Connect the control module wiring harnesses
    • Clip the control module wiring onto the control module bracket
    • Put the access panel into place
    • Push in the two access panel clips

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Swivel

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1999-2002Suzuki Grand Vitara Suzuki Grand Vitara Heater Blower Motor with Fan Cage
1999-2002Suzuki Vitara Suzuki Vitara Heater Blower Motor with Fan Cage
2001-2002Suzuki XL-7 Suzuki XL-7 Heater Blower Motor with Fan Cage

This part replaces:

  • TYC 700219
  • OE # 7425065D11
Part #: 1AHCX00300


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:22 min)