Replaces

Suzuki Grand Vitara XL-7 Exterior Door Handle - 1ADHE00397

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Color:   Chrome & Black

This exterior door handle is just what you need to get your Suzuki Grand Vitara in good working order again!

Door Handle Specifications:

  • LH (Driver Side) Front or Rear
  • Replaces dealer part numbers: 82820-65D10, 8282065D10
  • Injection molded black plastic bezel with Chrome Plated handle
  • Durable construction
  • Direct replacement for original handle

This door handle is a direct bolt on and is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:36)
    • Pry up the window switch panel with a flat blade screwdriver
    • Disconnect the window switch wiring harnesses
    • Remove the Phillips head screw inside the door handle
    • Remove the Phillips head screw inside the door pull
    • Pry out the door handle with a flat blade screwdriver
    • Unclip the door handle from the latch rod
    • Pry off the mirror base trim panel
    • Pry out the door panel by hand
    • Lift the door panel up and off
  2. step : Removing the Outside Door Handle (1:38)
    • Carefully peel back the water shield
    • Unclip the latch rod
    • Pry the latch rod out of the door handle
    • Remove the two 10mm bolts from the door handle
    • Pull the door handle off from the outside of the door
  3. step : Installing the New Door Panel (2:13)
    • Put the new door handle into place
    • Insert the two 10mm bolts into the door panel
    • Push the latch rod into the door panel
    • Clip on the latch rod
    • Put the water shield back into place
  4. step : Reinstalling the Door Panel (2:44)
    • Put the door panel into place
    • Push in the door panel clips
    • Connect the door handle to the latch rod
    • Insert the Phillips screw into the door handle
    • Insert the Phillips screw into the door pull
    • Connect the window switch wiring harnesses
    • Push the switch panel into the door
    • Push on the mirror base trim piece

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1999-2005Suzuki Grand Vitara Suzuki Grand Vitara Front or Rear Chrome & Black Exterior Door Handle Driver Side
2002-2006Suzuki XL-7 Suzuki XL-7 Front or Rear Chrome & Black Exterior Door Handle Driver Side
Part #: 1ADHE00397

Out of Stock

How-to Video:

(03:55 min)