This front brake pad set is just what you need to get your vehicle stopping in good order again!


  • 4 Piece FRONT Brake Pad Set
  • Direct replacement
  • Professional Grade SEMI-METALLIC Disc Brake Pads

This brake pad set makes a great replacement and has an excellent value over the price of dealer brake pads.

Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Part Details

  • Front or Rear Location: Front
  • Brake Pad Friction Material: Semi-Metallic

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:45)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:06)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:17)
    • Remove 14mm and 17mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  4. step : Removing the Rotor (1:39)
    • Remove the 17mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Installing the Rotor (2:05)
    • Clean the rotor with brake parts cleaner or mineral spirits
    • Apply grease to the brake pad tabs
    • Slide the rotor on
    • Put the bracket back into place
    • Insert and tighten the 17mm bolts by hand
    • Tighten the bolts between 80 and 85 foot-pounds of torque
  6. step : Installing the Brake Pads (2:52)
    • Install the new brake pads into the bracket
    • Use a large C-clamp to push the pistons back
    • Put the caliper on
    • Tighten the 17mm and 14mm bolts
    • Tighten the 17mm bolts between 50 and 55 foot-pounds of torque
    • Tighten the 14mm bolts between 40 and 45 foot-pounds of torque
  7. step : Reattaching the Wheel (3:44)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  8. step : Testing the Brakes (4:14)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Large C-Clamp
  • Floor Jack

  • Materials, Fluids, and Supplies

  • White Grease
  • Brake Parts Cleaner
  • Brake Fluid
  • Mineral Spirits

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 14mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1999-2005 Suzuki Grand Vitara Front Brake Pads Semi-Metallic
  • 2001 Suzuki Grand Vitara XL-7 Front Brake Pads Semi-Metallic
  • 1996-1998 Suzuki Sidekick Front Brake Pads Semi-Metallic L4 1.8L
  • 2002-2003 Suzuki XL-7 Front Brake Pads Semi-Metallic
  • 2004 Suzuki XL-7 4 Wheel Drive Front Brake Pads Semi-Metallic (Built Before VIN 44106615)
  • 2004 Suzuki XL-7 2 Wheel Drive Front Brake Pads Semi-Metallic (Built Before VIN 44103256)
Only 2 left in stock
Part #: 1ABPS00746

How-to Video:

(04:42 min)