Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Saves Time & Money

When you buy one of our kits, you not only save money over buying the parts individually, but you also save time having to search for all of the different parts that are correct for your vehicle (because we did it for you!)

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:23)
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:29)
    • Counterhold the upper sway bar nut with an 8mm socket and breaker bar
    • Loosen the nut with an 18mm wrench
    • Repeat for the lower nut
  3. step : Installing the Sway Bar Link (5:14)
    • Insert the sway bar link into place
    • Tighten the 18mm nut to the sway bar link by hand
    • Counterhold the sway bar link with an 18mm wrench
    • Tighten the upper sway bar link bolt with an 18mm socket and ratchet
    • Torque the lower bolt to 57 foot-pounds
    • Torque the upper bolt to 55 foot-pounds
  4. step : Reattaching the Wheel (7:23)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 140 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

  • Sockets - SAE

  • Complete SAE Socket Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2013-2016 Buick Enclave 4 Piece Set Suspension Kit
  • 2013-2016 Chevy Traverse 4 Piece Set Suspension Kit
  • 2013-2015 GMC Acadia 4 Piece Set Suspension Kit

This part replaces:

  • Moog K750155
  • OE # 20905104
Part #: 1ASFK05717

Out of Stock

How-to Video:

(08:07 min)