Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:53)
    • Loosen the lug nuts
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Upper Control Arm (1:21)
    • Remove the 19mm nut from the upper control arm ball joint
    • Support the wheel spindle with a bungee cord
    • Tap the wheel spindle with a hammer to loosen the ball joint stud
    • Separate the ball joint from the wheel spindle
    • Open the hood
    • If you are working on the driver side, release the power steering reservoir tab
    • Move the power steering reservoir aside
    • Remove the two 10mm bolts from the coolant reservoir
    • Move the coolant reservoir aside
    • Open the brake fluid reservoir door
    • Remove the two 18mm control arm bolts from the strut tower
    • Pull out the two captured bolts that hold the control arm to the wheel well
    • Pull the control arm down and out
  3. step : Installing the Control Arm and Wheel (6:23)
    • Lift the control arm into place
    • Insert the two bolt that hold the control arm to the wheel well
    • Insert the ball joint stud into the wheel spindle
    • Start the 19mm nut onto the ball joint stud
    • Tighten the 19mm nut to 35 foot-pounds of torque
    • Turn the 19mm nut 90 degrees farther
    • Remove the bungee cord from the wheel spindle
    • Slide on the wheel
    • Start the lug nuts
    • Lower the vehicle to put weight on the suspension
    • Fasten the 18mm nuts onto the control arm bolts at the strut tower
    • Torque the 18mm nuts to 55 foot-pounds
    • Close the brake reservoir access door, If you worked on the driver's side
    • Put the coolant reservoir into place
    • Insert the two 10mm bolts for the coolant reservoir
    • Clip the power steering reservoir onto the coolant reservoir
    • Close the hood
    • Tighten the lug nuts to 110 foot-pounds in a crossing pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Gloves
  • Bungee Cord

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 18mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:43 min)

Tools List:

    General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Gloves
  • Bungee Cord

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 18mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 18mm Wrench



This part replaces:

  • Moog K622225
  • Moog K80823
  • OE # 4872717
  • Hollander 512-01474L
  • Moog K620178
  • OE # 4895482AB
  • Dorman 521-008
  • Moog K622224
  • Hollander 512-01473R
  • OE # 4670509AF
  • OE # 4670508AF
  • OE # 4895483AB
  • OE # 4895482
  • OE # 5168389AA
  • Dorman 522-805
  • OE # 5168389AB
  • OE # 4782666AB
  • Dorman 522-801
  • Moog K80822
  • Moog K620177
  • Hollander 511-01107R
  • Hollander 511-01108L
  • Dorman 522-802
  • OE # 4782665AB
  • OE # 4872716
  • OE # 4895483
  • Dorman 521-007

Vehicle Fit

  • 2011-2016 Chrysler 300 Rear Wheel Drive 8 Piece Set Suspension Kit for Models without High Performance Suspension
  • 2011-2014 Dodge Challenger 8 Piece Set Suspension Kit for Models without High Performance Suspension
  • 2015-2016 Dodge Challenger V6 3.6L 8 Piece Set Suspension Kit for Models without High Performance Suspension
  • 2011-2016 Dodge Charger Rear Wheel Drive 8 Piece Set Suspension Kit for Models without High Performance Suspension
Part #: 1ASFK05674

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More