Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:38)
    • Loosen the lug nut covers with a 19mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:03)
    • Place a 14mm wrench to hold the back
    • Remove the nut with an 18mm socket
    • Remove the sway bar link
  3. step : Installing the New Sway Bar Link (1:41)
    • Push the sway bar link into place
    • Replace and tighten the 18mm nuts
  4. step : Reattaching the Wheel (2:03)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2008 Buick Allure 4 Piece Set Suspension Kit for Models with 17 Inch Wheels
  • 2005-2009 Buick LaCrosse 4 Piece Set Suspension Kit for Models with 17 Inch Wheels
  • 2004-2013 Chevy Impala 4 Piece Set Suspension Kit for Models with 17 Inch Wheels
  • 2004-2007 Chevy Monte Carlo 4 Piece Set Suspension Kit for Models with 17 Inch Wheels
  • 2004-2008 Pontiac Grand Prix 4 Piece Set Suspension Kit for Models with 17 Inch Wheels

This part replaces:

  • Moog K6662
  • OE # 10320234, 10415034
Part #: 1ASFK05549



How-to Video:

(03:09 min)