Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   4 Piece Set
  • Kit Includes:
      (2) Front Sway Bar Links
      (2) Front Upper Control Arms with Ball Joints

 

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:53)
    • Loosen the lug nuts
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Upper Control Arm (1:21)
    • Remove the 19mm nut from the upper control arm ball joint
    • Support the wheel spindle with a bungee cord
    • Tap the wheel spindle with a hammer to loosen the ball joint stud
    • Separate the ball joint from the wheel spindle
    • Open the hood
    • If you are working on the driver side, release the power steering reservoir tab
    • Move the power steering reservoir aside
    • Remove the two 10mm bolts from the coolant reservoir
    • Move the coolant reservoir aside
    • Open the brake fluid reservoir door
    • Remove the two 18mm control arm bolts from the strut tower
    • Pull out the two captured bolts that hold the control arm to the wheel well
    • Pull the control arm down and out
  3. step : Installing the Control Arm and Wheel (6:23)
    • Lift the control arm into place
    • Insert the two bolt that hold the control arm to the wheel well
    • Insert the ball joint stud into the wheel spindle
    • Start the 19mm nut onto the ball joint stud
    • Tighten the 19mm nut to 35 foot-pounds of torque
    • Turn the 19mm nut 90 degrees farther
    • Remove the bungee cord from the wheel spindle
    • Slide on the wheel
    • Start the lug nuts
    • Lower the vehicle to put weight on the suspension
    • Fasten the 18mm nuts onto the control arm bolts at the strut tower
    • Torque the 18mm nuts to 55 foot-pounds
    • Close the brake reservoir access door, If you worked on the driver's side
    • Put the coolant reservoir into place
    • Insert the two 10mm bolts for the coolant reservoir
    • Clip the power steering reservoir onto the coolant reservoir
    • Close the hood
    • Tighten the lug nuts to 110 foot-pounds in a crossing pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Gloves
  • Bungee Cord

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 18mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 18mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2005-2014Chrysler 300 Chrysler 300 Rear Wheel Drive 4 Piece Set Suspension Kit
2008-2014Dodge Challenger Dodge Challenger 4 Piece Set Suspension Kit
2006-2014Dodge Charger Dodge Charger Rear Wheel Drive 4 Piece Set Suspension Kit
2005-2008Dodge Magnum Dodge Magnum Rear Wheel Drive 4 Piece Set Suspension Kit
Part #: 1ASFK05534


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:43 min)