Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:55)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Front Sway Bar Links (1:24)
    • Remove the upper 19mm nut securing the sway bar link
    • Clamp down the sway bar link with vice grips if needed
    • Repeat the process for the lower end
  3. step : Installing the Front Sway Bar Links (4:02)
    • Insert the bottom of the link into the sway bar
    • Tighten the 22mm nut to the bottom of the link
    • Torque the lower part to 95 foot-pounds
    • Repeat the process for the upper end
  4. step : Reattaching the Wheel (5:01)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Gloves
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 22mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2010 Chrysler 300 Rear Wheel Drive (excluding SRT-8) 4 Piece Set Suspension Kit
  • 2006-2010 Dodge Charger Rear Wheel Drive 4 Piece Set Suspension Kit for Models without Sport Suspension
  • 2005-2008 Dodge Magnum Rear Wheel Drive 4 Piece Set Suspension Kit for Models without Sport Suspension

This part replaces:

  • Moog K80823
  • Moog K80822
  • OE # 4895483AB, 4872717, 4895483
  • OE # 4895482AB, 4872716, 4895482
Part #: 1ASFK05280


How-to Video:

(05:28 min)