Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Rear Sway Bar Links
  • Quantity: 4 Piece Set
  • Kit Includes: (2) Rear Shock Absorbers

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (0:50)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel.
  2. step : Remove the top of the strut (1:10)
    • Use your 13 mm socket and ratchet and some penetrating oil to remove the two bolts securing the top of the strut.
  3. step : Remove the bottom of the shock (1:27)
    • Unbolt the bottom bolt securing the shock.
    • Use a breaker bar and a 21 mm socket and some penetrating oil.
    • You might need a hammer to work the bolts out once you have removed the nuts.
    • Use a pry bar to pry the spindle free from the strut
  4. step : Install the new strut (2:10)
    • Work the strut into place and bolt in the top 10 mm bolts
    • Torque the two 13 mm nuts to 20-25 ft lbs
    • Bolt in the bottom nut and 21 mm bolt and torque to 45-50 ft lbs.
  5. step : Replace the wheel (2:40)
    • Put the wheel back on and hand tighten the lug nuts
    • Lower the vehicle and torque the lug nuts to 100 ft lbs

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Socket Extensions
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 21mm Socket
  • 13mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2008 Chevy Malibu New Body Style 4 Piece Set Suspension Kit
  • 2009-2012 Chevy Malibu 4 Piece Set Suspension Kit
  • 2005-2010 Pontiac G6 4 Piece Set Suspension Kit
  • 2007-2009 Saturn Aura 4 Piece Set Suspension Kit

This part replaces:

  • Moog K80851
Part #: 1ASFK05230


Order must be placed by 4pm ET

How-to Video:

(03:28 min)