Specifications:

  • Brand New Suspension Kit
  • Comes as a Set of 8
    • Fits LH (Driver Side ) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

An adjustable ball joint will look slightly different than a standard, non-adjustable version.  The stud will be offset once installed and can be rotated in order to allow a greater range of vehicle suspension alignment.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Quantity: 8 Piece Set
  • Kit Includes: (2) Front Lower Forward Control Arms with Ball Joints
  • Kit Includes: (2) Front Upper Control Arms with Ball Joints
  • Kit Includes: (2) Front Lower Adjustable Ball Joints
  • Kit Includes: (2) Front Sway Bar Links

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:55)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Front Sway Bar Links (1:24)
    • Remove the upper 19mm nut securing the sway bar link
    • Clamp down the sway bar link with vice grips if needed
    • Repeat the process for the lower end
  3. step : Installing the Front Sway Bar Links (4:02)
    • Insert the bottom of the link into the sway bar
    • Tighten the 22mm nut to the bottom of the link
    • Torque the lower part to 95 foot-pounds
    • Repeat the process for the upper end
  4. step : Reattaching the Wheel (5:01)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Gloves
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 22mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2010 Chrysler 300 Rear Wheel Drive 8 Piece Set Suspension Kit
  • 2012-2013 Chrysler 300 SRT-8 8 Piece Set Suspension Kit V8 6.4L
  • 2008-2010 Dodge Challenger Suspension Kit 8 Piece Set
  • 2006 Dodge Charger Suspension Kit 8 Piece Set
  • 2007-2013 Dodge Charger Rear Wheel Drive 8 Piece Set Suspension Kit
  • 2005-2008 Dodge Magnum Rear Wheel Drive 8 Piece Set Suspension Kit

This part replaces:

  • Moog K620258
  • Moog K620257
  • Moog K620177
  • Moog K620178
  • Moog K80823
  • Moog K80822
  • Moog K7469
  • Dorman 521-121
  • Dorman 521-122
  • Dorman 521-007
  • Dorman 521-008
  • Reference Number MS25120
  • Reference Number MS25121
  • Hollander 512-01474L
  • Hollander 512-01473R
  • Hollander 511-01108L
  • Hollander 511-01107R
  • OE # 5180606AA 5180607AB 4782613AC
  • OE # 5180606AA 5180606AB 4782612AC
  • OE # 4895483AB, 4872717, 4895483
  • OE # 4895482AB, 4872716, 4895482
  • OE # 4782740AB, 4782741AB
  • OE # 4782665AB
  • OE # 4782666AB
Part #: 1ASFK04940

How-to Video:

(05:28 min)