Specifications:

  • Brand New Suspension Kit
  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Lower Control Arms with Ball Joints
  • Kit Includes: (2) Front Sway Bar Links
  • Quantity: 4 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:40)
    • Loosen the lug nut covers with a 19mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:13)
    • Turn the wheel by hand
    • Hold the nut at the top of the sway bar link with a 13mm wrench
    • Loosen the sway bar link bolt with a 13mm socket and ratchet
    • Apply penetrating oil to the bolt if necessary
    • Make note of the positions of the bushings and washers
    • Tap the bolt out with a hammer
  3. step : Installing the New Sway Bar Link (2:36)
    • Place a rubber bushing on the control arm
    • Put on a washer
    • Put on the metal sleeve
    • Lift the sway bar with a pry bar
    • Put a rubber bushing on top of the metal sleeve
    • Put a washer and a rubber bushing onto the bolt
    • Slide the bolt into place
    • Put a rubber bushing on the bolt, on top of the way bar
    • Put on a washer
    • Thread on the nut
    • Hold the nut at the top of the sway bar link with a 14mm wrench
    • Tighten the sway bar link bolt with a 14mm socket and ratchet
  4. step : Reattaching the Wheel (4:10)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap, lining up the notch with the valve stem
    • Tighten the lug nut covers with a 22mm socket

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 13mm Socket
  • 14mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 13mm Wrench
  • 14mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
piece of cake
My only complaint is 1 unit had a zerk fitting to grease ball joint and the other was sealed, I haven't had to grease a ball joint for years.
July 28, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006-2007 Buick Allure 4 Piece Set Suspension Kit
  • 2008-2009 Buick Allure 4 Piece Set Suspension Kit without RPO Code FE4 (Special Ride & Handling Suspension)
  • 1997-2005 Buick Century 4 Piece Set Suspension Kit
  • 2005-2007 Buick LaCrosse 4 Piece Set Suspension Kit
  • 2008-2009 Buick LaCrosse 4 Piece Set Suspension Kit without RPO Code FE4 (Special Ride & Handling Suspension)
  • 1997-2004 Buick Regal 4 Piece Set Suspension Kit
  • 2000-2013 Chevy Impala 4 Piece Set Suspension Kit (excluding Police Package)
  • 1997-2005 Chevy Venture 4 Piece Set Suspension Kit
  • 1998-2002 Olds Intrigue 4 Piece Set Suspension Kit
  • 1997-2004 Olds Silhouette 4 Piece Set Suspension Kit
  • 1997-2003 Pontiac Grand Prix 4 Piece Set Suspension Kit
  • 2006-2008 Pontiac Grand Prix 4 Piece Set Suspension Kit for Models with 34mm Diameter Sway Bar
  • 1999-2004 Pontiac Montana 4 Piece Set Suspension Kit
  • 2005 Pontiac Montana 4 Piece Set Suspension Kit (excluding SV6 Models)
  • 1997-1998 Pontiac Trans Sport 4 Piece Set Suspension Kit

This part replaces:

  • Dorman 520-145
  • Hollander 512-01287L,1175L,00500L,1273L
  • Hollander 512-01298R, 1175R, 00499R
  • OE # 10344930, 10301560, 10328905
  • OE # 10344931, 10301559, 10328906
  • OE # 15851956
  • Moog K5342
  • Dorman 520-146
  • Hollander 512-01298R,1175R,00499R,1272R
Part #: 1ASFK03730

How-to Video:

(05:01 min)