Specifications:

  • Brand New Suspension Kit
  • Comes as a Set of 4
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

    NOTE: After completing the procedure you will need a professional alignment

  1. step : Removing the Wheel (0:47)
    • Loosen the 22mm caps on the hubcap with the vehicle on the ground
    • Pull the hubcap free
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Upper Control Arm (1:10)
    • Mark the tab on the adjustment piece with a marker to mark the alignment
    • Remove the two 10mm bolts holding the brake line and move the brackets
    • Remove the ball joint nut with an 18mm wrench
    • Hit the wheel knuckle and control arm to break them free
    • Remove the 21mm nuts from the upper control arm bracket
    • Jack up the wheel underneath the wheel knuckle
    • Remove the upper control arm nut
    • Remove the bolts and upper control arm bracket
    • Place a nut back on and use an air hammer to knock the bolt out if it won't budge
    • Move the control arm up and down while pulling out
  3. step : Installing the Upper Control Arm (3:52)
    • Put the upper control arm into place and push the 21mm bolts in to hold it
    • Put the brackets on either side and realign them up
    • Angle the control arm down into the wheel knuckle
    • Replace the 18mm ball joint nut
    • Replace the 21mm nuts from the upper control arm bracket
    • Replace and tighten the two 10mm bolts
    • Put a grease gun into place on the end of the control arm and fill it up
  4. step : Reattaching the Wheel (6:00)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Reattach the hubcap and tighten the caps

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Marker / Writing Utensil

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 10mm Socket
  • 21mm Socket
  • 22mm Socket

  • Specialty Tools

  • Grease Gun

  • Wrenches - Metric

  • 18mm Wrench
  • 21mm wrench

4.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
1
1
0
0
The parts I ordered was delivered quickly and fit perfectly thanks
February 18, 2017
Purchased
1 year ago
Front suspension work on my 2001 Tahoe:
I have owned this vehicle for 16 years, and parts cost to make repairs to the suspension to improve handling and eliminate tire wear issues was well worth the effort, and the material cost was reasonable in my opinion. I was so impressed with the service, i decided to update the suspension on my 2004 Pontiac Grand Prix, by replacing the Struts on the front and rear, and I am pleased the the improved performance on that vehicle as well, to the point I am ready to order suspension and brake parts for my 2010 Dodge Charger R/T soon.
February 21, 2017
Purchased
1 year ago
upset
lower ball joints are inpossible to press in without damaging the rubber boot have destroyed one already.
September 17, 2017
Purchased
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2006 Cadillac Escalade 4 Piece Set Suspension Kit
  • 2003-2006 Cadillac Escalade ESV 4 Piece Set Suspension Kit
  • 2002-2006 Cadillac Escalade EXT 4 Piece Set Suspension Kit
  • 2002-2006 Chevy Avalanche 1500 4 Piece Set Suspension Kit
  • 2003-2014 Chevy Express 1500 Van 4 Piece Set Suspension Kit
  • 2003-2005 Chevy Express 2500 Van 7300LB GVW 4 Piece Set Suspension Kit
  • 1999-2006 Chevy Silverado 1500 4 Wheel Drive 4 Piece Set Suspension Kit
  • 2007 Chevy Silverado 1500 Classic 4 Wheel Drive 4 Piece Set Suspension Kit
  • 2000-2006 Chevy Suburban 1500 4 Piece Set Suspension Kit
  • 2000 Chevy Tahoe 4 Piece Set Suspension Kit (excluding Z71 Models)
  • 2001-2006 Chevy Tahoe 4 Piece Set Suspension Kit
  • 2003-2013 GMC Savana 1500 Van 4 Piece Set Suspension Kit
  • 2003-2005 GMC Savana 2500 Van 7300LB GVW 4 Piece Set Suspension Kit
  • 1999-2006 GMC Sierra 1500 4 Wheel Drive 4 Piece Set Suspension Kit
  • 2007 GMC Sierra 1500 Classic 4 Wheel Drive 4 Piece Set Suspension Kit
  • 2000 GMC Yukon 4 Piece Set Suspension Kit (excluding Denali Models)
  • 2001-2006 GMC Yukon 4 Piece Set Suspension Kit
  • 2000-2006 GMC Yukon XL 1500 4 Piece Set Suspension Kit

This part replaces:

  • Hollander 511-01044
  • Moog K80942
  • OE # 12475478
  • OE # 15864153, 12475485, 15047200
  • Moog K6541
  • Dorman 520-116
Part #: 1ASFK02549



How-to Video:

(07:07 min)