Specifications:

  • Suspension Kit Includes:
    • (2) - Front Upper Ball Joints - LH (Driver Side) & RH (Passenger Side)
    • (2) - Front Lower Ball Joints - LH (Driver Side) & RH (Passenger Side)
    • (2) - Front Outer Tie Rod Ends - LH (Driver Side) & RH (Passenger Side)
    • (2) - Front Sway Bar Links - LH (Driver Side) & RH (Passenger Side)
    • (2) - Rear Sway Bar Links - LH (Driver Side) & RH (Passenger Side)
    • (2) - Front Inner Tie Rod Ends - LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:43)
    • Pry off the hub cap with a flat blade screwdriver
    • Loosen the 35mm hub nut with the vehicle on the ground
    • Loosen the lug nuts
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:08)
    • Spray both ends of the outer tie rod with penetrating oil
    • Measure from the either end of the outer tie rod
    • Place a 26mm wrench on the larger nut
    • Place a 22mm wrench on the smaller nut
    • Break the 22mm nut free
    • Straighten the cotter pin with pliers and pull it through
    • Remove the nut with a 21mm socket from the wheel knuckle
    • Hit the wheel knuckle with a hammer
    • Twist off the outer tie rod
    • Remove the 22mm nut off the outer tie rod
  3. step : Installing the New Outer Tie Rod (3:08)
    • Mark where the 22mm nut was located on the old tie rod to the new tie rod
    • Screw on the nut
    • Twist the outer tie rod into place
    • Push the outer tie rod into the wheel knuckle
    • Measure and check the outer tie rod distance
    • Tighten the 21mm nut on the wheel knuckle
    • Insert and twist the cotter pin with a pair of pliers
    • Tighten the two nuts on the outer tie rod
  4. step : Reattaching the Wheel (4:33)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the hub nut
    • Torque the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Torque the hub nut to 103 ft/lbs
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Measuring Tape
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 26mm Wrench
  • 22mm Wrench
  • 10mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(05:20 min)

Tools List:

    General Tools

  • Floor Jack
  • Measuring Tape
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 26mm Wrench
  • 22mm Wrench
  • 10mm Wrench



This part replaces:

  • Moog K6663
  • Moog K6664
  • Moog ES3675
  • Moog ES3676
  • Moog K80824
  • Moog K80825
  • Moog EV80965
  • Moog K6668
  • Moog K6667
  • OE # 26100286
  • OE # 26100287
  • OE # 22157319, 19133670, 8191336700
  • OE # 22157320
  • OE # 26100288

Vehicle Fit

  • 2004-2007 Buick Rainier Suspension Kit 12 Piece Set
  • 2004-2007 Chevy Trailblazer Suspension Kit 12 Piece Set
  • 2004-2005 Chevy Trailblazer EXT Suspension Kit 12 Piece Set
  • 2004-2007 GMC Envoy Suspension Kit 12 Piece Set
  • 2004-2006 GMC Envoy XL Suspension Kit 12 Piece Set
  • 2004-2007 Isuzu Ascender Suspension Kit 12 Piece Set
  • 2004 Olds Bravada Suspension Kit 12 Piece Set
  • 2005-2007 Saab 9-7X Suspension Kit 12 Piece Set
Part #: 1ASFK02494

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More