Suspension Kit - 1ASFK02349

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   8 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (2) Front Upper Control Arms
      (2) Front Sway Bar Links
      (2) Front Upper Ball Joints


  • Brand New Steering & Suspension Kit
  • Comes as a 8 piece kit
    • Fits LH (Driver Side) & RH (Passenger Side) Front
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:41)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Control Arm (1:03)
    • Apply penetrating oil to the 15mm bolt that holds the control arm to the steering knuckle Remove the 15mm bolt that holds the control arm to the steering knuckle
    • Pry the brake line from its clips with a flat blade screwdriver
    • Strike the control arm with a hammer to separate it from the steering knuckle
    • Secure the knuckle with wire ties, wire, or string
    • Apply penetrating oil to the two 21mm control arm bolts
    • Remove one 21mm bolt from the control arm
    • Loosen the other 21mm bolt
    • Push out the second 21mm bolt with a hammer and a flat blade screwdriver
    • Pull off the control arm
    • Strike the remaining bolt out of the control arm with a hammer
  3. step : Installing the New Control Arm (3:52)
    • Pry the brake line clips out of the control arm with a flat blade screwdriver
    • Push the new control arm into place
    • Start the two 21mm bolts into the control arm
    • Tighten the two 21mm bolts preliminarily
    • Remove whatever is securing the wheel knuckle
    • Put the control arm onto the wheel knuckle
    • Tap the control arm onto the wheel knuckle using a hammer
    • Start the 15mm bolt and nut that hold the control arm to the steering knuckle
    • Tighten the 15mm bolt to 50 foot-pounds of torque
    • Push the brake line clips onto the new control arm
    • Clip the brake line into the clips
  4. step : Reattaching the Wheel (6:11)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack
  • Hammer

  • Materials, Fluids, and Supplies

  • Wire Ties
  • Rust Penetrant
  • Wire or String

  • Pliers, Cutters & misc Wrenches

  • Wire Cutters
  • Needle nose pliers

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 21mm wrench
  • 15mm Wrench

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
worked wonders on improving the ride, good quality parts at an affordable price, same as 1AAuto has always provided me
June 14, 2017
Great product
Great prices and everything you need with diy videos
July 14, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2004-2007Buick Rainier Buick Rainier 8 Piece Set Suspension Kit
2004-2007Chevy Trailblazer Chevy Trailblazer 8 Piece Set Suspension Kit
2004-2006Chevy Trailblazer EXT Chevy Trailblazer EXT 8 Piece Set Suspension Kit
2004-2007GMC Envoy GMC Envoy 8 Piece Set Suspension Kit
2004GMC Envoy XL GMC Envoy XL 8 Piece Set Suspension Kit
2004-2008Isuzu Ascender Isuzu Ascender 8 Piece Set Suspension Kit
2004Oldsmobile Bravada Olds Bravada 8 Piece Set Suspension Kit
2005-2009Saab 9-7X Saab 9-7X 8 Piece Set Suspension Kit
Part #: 1ASFK02349

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:28 min)