Part Details

  • Quantity: 4 Piece Set
  • Kit Includes:
    (2) Front Upper Control Arms with Ball Joints
    (2) Front Strut & Spring Assemblies


  • Comes as a Set of 4
    • Fits LH (Driver Side) and RH (Passenger Side) Front
  • Each strut assembly includes:
    • Replacement upper mount
    • Upper and lower spring isolators
    • Upper spring seat
    • Coil spring
    • Boot kit
    • Strut
  • Control arms include ball joints
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.


Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

4.8 / 5.0
12 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Great product
This product was exactly as described. This site not only guides you to get exactly what you need but it gets to you very quick
September 11, 2018
1 month ago
2002 Chrysler Sebring Suspension
The Front strut assembly with upper control arms fit perfectly. I could not give 5 stars because I also ordered front lower ball joints and they would not fit. Will have to return them Needed the complete lower control arm on this car.
July 26, 2018
2 months ago
Response from 1A Auto
I am sorry to hear about the issue with the ball joints. We have issued a full refund back to your original form of payment. If there's anything else we can do please don't hesitate to ask, we'll be happy to help. Thank you again, and have a good day!
July 27, 2018
Elesban A
Great product
I had originally ordered the strut assembly for my 2001 Chysler Sebring Convertable without the control arms. After receiving the product I determined I should have ordered the complete Suspension Kit.
Returning the product to 1A was very easy with no restocking fee. For $30 more I ordered the complete Suspension Kit which was a perfect replacement.
I will definitely be ordering more parts from 1A Auto in the future!
July 3, 2018
3 months ago
Old car.
Given the low cost, I was a bit concerned about quality even though my car is an old dog. Quality is great, installed without issue, no problems on the road.
June 23, 2018
3 months ago
Very good
Real fast shipping for being free, items as seen in pix!
May 23, 2018
4 months ago
Made the job easy just bolt in and out no compressing the springs. Came fast, fit exact, and perfect as always from these guys!
February 23, 2018
8 months ago
2005 Sebring front sruts
The control arm bushings were bad on the drivers side. I looked at just replacing the control arm bushings and struts, but getting the assembly apart is somewhat dangerous using spring clamping devices. I ordered the whole assembly which made it easier. Two things that will make the job easier. When you have to pit the strut on the suspension clevis, wedge something in there to spread the assembly and you can slip the assembly right over the strut and make it small enough that you can slip the pinch bolt right in. I used a thick washer. You also have to tighten the control arm bolts after you have the assembly installed. You have to put a jack under the lower control arm, put the assembly in the loaded position, and tighten the upper control arm bolts. This is not in the instructions. This is important as the loose control bolts could come loose and cause the control arms to come out. This was easier than trying to get the assembly apart, replace control arm bushings, and put the assembly back together. You cannot get the control arm bolts without taking the strut assembly apart, they are held captive by the spring. So far, so good. We will see how well they do with some miles on them.
October 23, 2017
11 months ago
Strut assembly
I was very satisfied, easy installment, my car drives smooth again thanks to the quality Parts I ordered from this company.
September 30, 2017
1 year ago
Will shop with 1A again
I ordered the strut pair for my 2001 Sebring. The parts arrived in 3 days. Installed them but something was wrong with the drivers side. It moved around and had to take it back off, Found that when the strut was put together at the factory they forgot to install one of the bushings. Called 1A and they had me take pictures and email them. They then sent pictures to their quality assurance dept. to make sure they didn't have anymore in stock that were not right. They then shipped me a new strut with at no charge. Everyone was nice and I didn't have to argue with anyone. I received the new strut and installed it and it works great. The struts fit like a glove and other than the one bushing on the bad strut the quality and finish were very good. Thank you 1A. I ordered new ball joints for my Durango the next day.
August 27, 2017
1 year ago
The struts worked great, fit perfect and the shipping and price were awesome. I will do business with you again.
August 18, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
Where is the how to install video ?
Jimmy B on Aug 7, 2017
BEST ANSWER: I searched on you tube and found a helpful video

Vehicle Fit

Year Make Model Description
1999-2000Chrysler Cirrus Chrysler Cirrus Suspension Kit 4 Piece Set
2001-2006Chrysler Sebring Chrysler Sebring Convertible Suspension Kit 4 Piece Set
2001-2006Chrysler Sebring Chrysler Sebring Sedan Suspension Kit 4 Piece Set
1999-2000Dodge Stratus Dodge Stratus Suspension Kit 4 Piece Set
2001-2006Dodge Stratus Dodge Stratus Sedan Suspension Kit 4 Piece Set
1999-2000Plymouth Breeze Plymouth Breeze Suspension Kit 4 Piece Set

This part replaces:

  • Hollander 527-01468L
  • Hollander 527-01470L
  • Hollander 527-02028L
  • Hollander 527-01467R
  • Hollander 527-01469R
  • Hollander 527-02027R
Part #: 1ASFK02308

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout