Specifications:

  • Brand New Idler Arm, Pitman Arm, & Idler Arm Bracket Kit
  • Built to strict quality control standards
  • Direct replacement

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Pitman Arm (0:29)
    • Loosen the three 21mm bolts holding the steering box to the frame
    • Remove the 21mm castle nut on the ball joint end of the pitman arm
    • Remove the pitman arm from the steering linkage with a two jaw puller or a pickle fork
    • Pull the pitman arm out of the steering linkage
    • Hold the steering box in place
    • Remove the 34mm nut on the pitman arm
    • Insert the two jaw puller to the pitman arm
    • Pry the pitman arm off of the steering box
    • Remove the pitman arm from the truck
  2. step : Installing the Pitman Arm (6:00)
    • Grease the pitman arm with a grease gun
    • Insert the pitman arm up into place
    • Attach the washer and 34mm bolt
    • Tighten the 34mm bolt
    • Press the pitman arm into the steering linkage
    • Hand-tighten the castle nut
    • Hand-tighten the three 21mm bolts into the steering box
    • Tighten the steering box bolts
    • Tighten the 19mm castle nut
    • Insert the cotter pin into the castle nut
    • Bend the cotter pin

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • Complete Metric Socket Set

  • Specialty Tools

  • 2 Jaw Gear Puller
  • Grease Gun
  • Pickle Fork
  • Acetylene torch

4.1 / 5.0
7 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
3
0
1
0
Half way decent
The pitman arm worked great but the idler arm I received wore out in a few weeks and I do no off roading. So id pay more for a better quality product
June 29, 2017
Purchased
11 months ago
Great parts and sevice
Just AWESOME THANK YOU 1a auto
I will always order from you guys for any of my projects.
Great service and fast
No waiting to talk to someone who don't even know about parts and even at that I got a call from a tech specialist AWESOME just awesome thanks
October 30, 2017
Purchased
6 months ago
????
Thank you everything fits great ???? you guys are the best
July 29, 2017
Purchased
9 months ago
Great parts overall!!
I gave these parts a 5 star rating.......overall quality parts, I didn't particularly like the mounting nuts, they appeared a little cheap. I just used the original nuts so everything worked fine.
August 28, 2017
Purchased
8 months ago
Good So Far
Parts fit spot on and seemed of good quality, I just wish the parts would’ve had grease fittings so I’m not sure how I would ever re grease them.
November 11, 2017
great
idler arm and bracket holder worked out great, did not need the pitman arm after all, unfortunately I cant get to the hassle free return section to return it..
September 12, 2017
Purchased
7 months ago
Suspension parts
The parts seen to be good quality and fixed my frontend, the idler bracket was wider than the truck bracket.
March 16, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 5 answers
what is the country of parts origin?
scotty m on Jan 2, 2016
BEST ANSWER: Hello, We have a few different manufacturers of these items. They are all from overseas manufacturers.
How do I know if my vehicle is a 3 or 4 groove pitman arm?
Jjoe R on Jan 31, 2017
BEST ANSWER: To identify whether your vehicle has a 3 groove or 4 groove pitman arm, you may visually inspect the OEM pitman arm, or in some cases you may call a local dealership parts department with your VIN as they would have access to a build sheet for your vehicle.
I don't see any grease fittings, do these come pre-greased?
Wyatt A on Apr 18, 2018
BEST ANSWER: These come pre-greased, and are not re-greaseable. They are totally sealed.

Vehicle Fit

  • 2002-2006 Cadillac Escalade Suspension Kit for Models with 4 Groove Pitman Arm
  • 2003-2006 Cadillac Escalade ESV Suspension Kit for Models with 4 Groove Pitman Arm
  • 2002-2006 Cadillac Escalade EXT Suspension Kit for Models with 4 Groove Pitman Arm
  • 2002-2006 Chevy Avalanche 1500 Suspension Kit for Models with 4 Groove Pitman Arm
  • 2003-2006 Chevy Express 2500 Van Suspension Kit for Models with 4 Groove Pitman Arm
  • 2003-2006 Chevy Express 3500 Van Suspension Kit for Models with 4 Groove Pitman Arm
  • 1999-2003 Chevy Silverado 1500 4 Wheel Drive Suspension Kit for Models with 4 Groove Pitman Arm
  • 2004-2006 Chevy Silverado 1500 4 Wheel Drive Suspension Kit for Models with 4 Groove Pitman Arm (excluding Crew Cab)
  • 2007 Chevy Silverado 1500 Classic 4 Wheel Drive Suspension Kit for Models with 4 Groove Pitman Arm (excluding Crew Cab)
  • 2000-2006 Chevy Suburban 1500 Suspension Kit for Models with 4 Groove Pitman Arm
  • 2000-2006 Chevy Suburban 2500 Suspension Kit for Models with 4 Groove Pitman Arm
  • 2000 Chevy Tahoe Suspension Kit for Models with 4 Groove Pitman Arm (excluding Z71 Models)
  • 2001-2006 Chevy Tahoe Suspension Kit for Models with 4 Groove Pitman Arm
  • 2003-2006 GMC Savana 2500 Van Suspension Kit for Models with 4 Groove Pitman Arm
  • 2003-2006 GMC Savana 3500 Van Suspension Kit for Models with 4 Groove Pitman Arm
  • 1999-2003 GMC Sierra 1500 4 Wheel Drive Suspension Kit for Models with 4 Groove Pitman Arm
  • 2004-2006 GMC Sierra 1500 4 Wheel Drive Suspension Kit for Models with 4 Groove Pitman Arm (excluding Crew Cab)
  • 2007 GMC Sierra 1500 Classic 4 Wheel Drive Suspension Kit for Models with 4 Groove Pitman Arm (excluding Crew Cab)
  • 2000 GMC Yukon Suspension Kit for Models with 4 Groove Pitman Arm (excluding Denali Models)
  • 2001-2006 GMC Yukon Suspension Kit for Models with 4 Groove Pitman Arm
  • 2000-2006 GMC Yukon XL 1500 Suspension Kit for Models with 4 Groove Pitman Arm

This part replaces:

  • OE # 19149615
  • OE # 12471378, 19149615
  • OE # 12471379
  • Moog K6723
  • Moog K6534
  • Moog K6536
Part #: 1ASFK02245



How-to Video:

(09:03 min)