Specifications:

  • Comes as a Set of 6
    • Fits LH (Driver Side) & RH (Passenger Side) FRONT
  • Includes Lower Control Arms, Sway Bar Links, and Outer Tie Rods
  • Direct Replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Quantity: 6 Piece Set
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Lower Control Arms with Ball Joints
  • Kit Includes: (2) Front Sway Bar Links

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

    It is recommended to seek a professional alignment after completing this repair.

  1. step : Removing the Wheel (0:50)
    • Loosen the lug nut covers with a 19mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:08)
    • Measure the distance from the boot of the inner tie rod to the edge of the outer tie rod
    • Make note of this measurement
    • Loosen the nut that holds the outer tie rod to the inner tie rod with an adjustable wrench
    • Remove the 18mm nut from the outer tie rod end
    • Loosen the nut that holds the outer tie rod to the inner tie rod with an adjustable wrench
    • Strike the steering knuckle with a hammer to loosen the outer tie rod
    • Pull the outer tie rod out of the steering knuckle
    • Twist off the outer tie rod by hand
  3. step : Installing the New Outer Tie Rod (1:55)
    • Twist the new outer tie rod onto the inner tie rod
    • Push the outer tie rod into the steering knuckle
    • Place vise grip pliers to hold the other part of the ball joint
    • Fasten the 18mm nut onto the outer tie rod with a socket
    • Place the pliers on the bottom of the bolt
    • Tighten the nut with an 18mm wrench
    • Tighten the nut that holds the outer tie rod to the inner tie rod with an adjustable wrench
    • Measure the distance from the boot of the inner tie rod to the edge of the outer tie rod
    • This should be the same as the measurement noted in Step 2
  4. step : Reattaching the Wheel (3:29)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket

Tools needed for replacement:

    General Tools

  • Measuring Tape
  • Jack Stands
  • Hammer
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers
  • Adjustable Wrench

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 18mm Wrench

  • Wrenches - SAE

  • 13/16 Inch Wrench

5.0 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
Parts
I thought the quality of the parts was excellentWrite your review here. It must be at least 50 characters long. Consider whether you would recommend this product and what you like or dislike about it.
March 26, 2018
Purchased
4 months ago
The parts Were the right fit and I look forward to getting other parts for my projects in the near future.
December 24, 2017
Purchased
7 months ago
Parts ordered
I purchased ball joints and tie rod ends and control arms for a 2007 Chevrolet Malibu everything fit perfect also saved me 500 dollars for 2.5 hrs of work thanks I will definitely purchase from you again.
May 12, 2017
Purchased
1 year ago
Hi quality. Exact fit.
All parts were high quality. Tie rods came with grease fittings -- better than the original ones. The videos from your site always help. I would recommend these parts. Always best prices too.
January 22, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2005 Chevy Malibu New Body Style Suspension Kit 6 Piece Set for Models without RPO Code FE5 (Performance Ride Handling Suspension)
  • 2006-2012 Chevy Malibu Suspension Kit 6 Piece Set for Models without RPO Code FE5 (Performance Ride Handling Suspension)
  • 2004-2007 Chevy Malibu Maxx Suspension Kit 6 Piece Set for Models without RPO Code FE5 (Performance Ride Handling Suspension)
  • 2005-2010 Pontiac G6 Suspension Kit 6 Piece Set
  • 2007-2009 Saturn Aura Suspension Kit 6 Piece Set for Models without RPO Code FE5 (Performance Ride Handling Suspension)

This part replaces:

  • Dorman 520-163
  • Dorman 520-164
  • Hollander 512-01416L
  • Hollander 512-01415R
  • OE # 15944090
  • OE # 22687089
  • Moog K80252
  • Moog ES800086
  • Moog K620179
  • Moog K620180
  • OE # 22730775
  • OE # 22730776
  • OE # 20784686
  • OE # 22687089, 15944090
Part #: 1ASFK02142

How-to Video:

(04:22 min)