Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item, the end links and frame bushings are. Over time the ball & socket joints can wear causing loose connections, or even come apart and fall off.


  • Comes as a SET of 4
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Direct replacements
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links and bushings. These parts make great replacements and offer good cost savings over the dealer parts.

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:17)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Pull off the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Links (2:52)
    • Grab the backside of the joint with locking pliers
    • Remove the 14mm nut from the sway bar link
    • Repeat the process for the lower end
  3. step : Installing the New Sway Bar Links (5:34)
    • Insert the lower end of the sway bar link into place
    • Start the 14mm nuts
    • Torque the sway bar link nuts to 29 foot-pounds
  4. step : Reattaching the Wheel (6:30)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts 76 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 14mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998-2001 Lexus ES300 4 Piece Set Suspension Kit
  • 1998-2004 Toyota Avalon 4 Piece Set Suspension Kit
  • 1997-2000 Toyota Camry 4 Piece Set Suspension Kit
  • 2001 Toyota Camry 4 Piece Set Suspension Kit V6 3.0L
  • 2001 Toyota Camry 4 Piece Set Suspension Kit (Built Before 7/01 Production Date) L4 2.2L
  • 1999-2001 Toyota Solara 4 Piece Set Suspension Kit

This part replaces:

  • OE # 4881533050
  • OE # 4881033010
  • OE # 4881006030
  • OE # 4882006030
  • Moog K90311
  • Moog K90312
  • Moog K90025
Part #: 1ASFK01919

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(07:21 min)