Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item, the end links and frame bushings are. Over time the ball & socket joints can wear causing loose connections, or even come apart and fall off.

Specifications:

  • Comes as a SET of 4
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Direct replacements
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links and bushings. These parts make great replacements and offer good cost savings over the dealer parts.

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:14)
    • Loosen the lug nuts with your lug wrench.
    • Raise and secure the car.
    • Remove the lug nuts and remove the wheel.
  2. step : Remove the stabilizer link (1:35)
    • Spray the bolts with penetrating oil
    • Use a 5mm Allen wrench and an 18 mm wrench to remove the nut and bolt on the stabilizer link.
    • Repeat on the bottom.
    • Use a Sawzall to remove the stabilizer link if it is rusted on there.
    • You can rent a Sawzall at a home improvement supply store.
  3. step : install the new stabilizer links (6:20)
    • Put the stabilizer link in place and use your wrench to bolt the locking lug nuts on.
  4. step : Put the wheel back on (7:38)
    • Hand-tighten the lug nuts and then lower the car.
    • Refer to the owner’s manual to torque the lug nuts to the correct ft lbs.
    • Use a star pattern.

Tools needed for replacement:

    Allen Wrenches

  • 5/16 Inch Allen Wrench

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Wrenches - SAE

  • 3/4 Inch Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1996-2000 Chrysler Town & Country 4 Piece Set Suspension Kit
  • 2000 Chrysler Voyager 4 Piece Set Suspension Kit
  • 1996-2000 Dodge Caravan 4 Piece Set Suspension Kit
  • 1996-2000 Dodge Grand Caravan 4 Piece Set Suspension Kit
  • 1996-2000 Plymouth Grand Voyager 4 Piece Set Suspension Kit
  • 1996-2000 Plymouth Voyager 4 Piece Set Suspension Kit

This part replaces:

  • OE # 4743021AA
  • OE # 4743454AA
  • OE # 4743669AA
  • OE # 4684890
  • Moog K7258
  • Moog K7350
Only 2 left in stock
Part #: 1ASFK01914

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(07:55 min)