Specifications:

  • 8 Piece Suspension Kit includes:
    • (2) - FRONT Strut & Spring Assemblies - LH (Driver Side) & RH (Passenger Side)
    • (2) - REAR Shock Absorbers - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT Sway Bar End Link - LH (Driver Side) & RH (Passenger Side)
    • (2) - REAR Sway Bar End Link - LH (Driver Side) & RH (Passenger Side)
  • Each strut and spring assembly includes:
    • Replacement upper mount
    • Upper and lower spring isolators
    • Upper spring seat
    • Coil spring
    • Boot kit
  • Rear Shocks only
    • Do not include springs or mounts
  • Not for models with Nivomat rear suspension
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:14)
    • Loosen the lug nuts with your lug wrench.
    • Raise and secure the car.
    • Remove the lug nuts and remove the wheel.
  2. step : Remove the stabilizer link (1:35)
    • Spray the bolts with penetrating oil
    • Use a 5mm Allen wrench and an 18 mm wrench to remove the nut and bolt on the stabilizer link.
    • Repeat on the bottom.
    • Use a Sawzall to remove the stabilizer link if it is rusted on there.
    • You can rent a Sawzall at a home improvement supply store.
  3. step : install the new stabilizer links (6:20)
    • Put the stabilizer link in place and use your wrench to bolt the locking lug nuts on.
  4. step : Put the wheel back on (7:38)
    • Hand-tighten the lug nuts and then lower the car.
    • Refer to the owner’s manual to torque the lug nuts to the correct ft lbs.
    • Use a star pattern.

Tools needed for replacement:

    Allen Wrenches

  • 5/16 Inch Allen Wrench

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Wrenches - SAE

  • 3/4 Inch Wrench

1.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
0
0
0
1
waste of money
Every thing in the kit is ok except the front struts, I spent all day installing them only to find out the 3 bolts at top were incredibly weak one actually snapped in half. I'm very displeased. A complete waste of my day off work and a waste of money. I won't buy new struts from here ever again.
August 19, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 3 answers
Who is the manufacturer of the strut assembly?
Javier M on Sep 6, 2016
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.

Vehicle Fit

  • 2001-2007 Chrysler Town & Country Front & Rear Suspension Kit 8 Piece Set for Models without Nivomat Suspension
  • 2001-2003 Chrysler Voyager Front & Rear Suspension Kit 8 Piece Set for Models without Nivomat Suspension
  • 2001-2007 Dodge Caravan Front & Rear Suspension Kit 8 Piece Set for Models without Nivomat Suspension
  • 2001-2007 Dodge Grand Caravan Front & Rear Suspension Kit 8 Piece Set for Models without Nivomat Suspension

This part replaces:

  • Moog K7301
  • Moog K7258
  • Reference Number 173170, 37123
  • OE # 5272190
  • OE # 4743226AA, 32AA, 24AA, 30AA
  • Monroe 181572L
  • Monroe 181572R
  • Monroe 171572L
  • Monroe 171572R
  • Monroe 37123
  • KYB 344080
  • KYB SR4039
  • KYB SR4038
Part #: 1ASFK01883



How-to Video:

(07:55 min)