Specifications:

  • Comes as a 4 Piece Kit:
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Upper Control Arms with Ball Joints
  • Quantity: 4 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the Wheel (1:59)
    • Pull off the center cap
    • Loosen the lug nuts
    • Remove the cotter pin and loosen the 35mm hub nut
    • Loosen the seven 13mm 12-point bolts that hold the axle to the front drive
    • Raise and secure the car
    • Remove the wheel
  2. step : Loosen the Torsion Bar (2:54)
    • Spray the torsion bar with spray paint and loosen the torsion bar tension bolt with an 18mm bolt
  3. step : Remove the Tie Rod (3:45)
    • Use a pair of pliers to remove the cotter pin
    • Remove the nut at the end of the tie rod
    • Use a tie rod puller to separate the tie rod
  4. step : Remove the stabilizer links (5:25)
    • Use a 9/16 wrench to secure the bottom and a 14 mm socket to unbolt the stabilizer link
    • Use a hammer and punch to remove the stabilizer link
  5. step : Pull the Axle from the CV Joint (6:52)
    • Unbolt the seven bolts, using a pry bar to keep the hub from rotating
    • Remove the hub nut using a 35 mm socket
    • Give the axle a tap with a hammer and pull the axle out
  6. step : Remove the Ball Joint (9:00)
    • Use a jack and wood plank or two to lift the control arm and relieve tension from the ball joint
    • Unbolt the the ball joint using a breaker bar and 27mm socket
    • Use a ball joint removal tool to pull the ball joint apart
    • With a ball joint press, remove the ball joint completely
    • See Part Two for reassembly

Tools needed for replacement:

    General Tools

  • Center Punch
  • Floor Jack
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Block of Wood
  • Marker / Writing Utensil
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • Complete Metric Socket Set

  • Specialty Tools

  • Ball Joint Press
  • Tie Rod Puller

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Great parts
Well constructed and great fitment. I would recommend these as a direct replacement to factory parts.
August 15, 2017
Purchased
1 year ago
GOOD PRICE GREAT FIT
The part came quick at a great price and went on without any problem. I saved a ton of money doing it myself.
June 27, 2017
Purchased
1 year ago
'99 Ranger control arm, ball joint kit
Reasonably priced, quick delivery, good quality and helpful videos . If my son leaves his truck home for a minute, Ill get them installed. I always check with 1A first ! Thanks 1A
April 24, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 4 answers
Are these after market parts?
Mitchell R on Aug 9, 2017
BEST ANSWER: Yes, but they appear to be better quality than factory parts. I was very satisfied with them

Vehicle Fit

Year Make Model Description
1998-2011Ford Ranger Ford Ranger 2 Wheel Drive 4 Piece Set Suspension Kit for Models with Front Coil Spring Suspension
2001-2009Mazda B2300 Truck Mazda B2300 Truck 2 Wheel Drive 4 Piece Set Suspension Kit for Models with Front Coil Spring Suspension
1998-2001Mazda B2500 Truck Mazda B2500 Truck 2 Wheel Drive 4 Piece Set Suspension Kit for Models with Front Coil Spring Suspension
1998-2007Mazda B3000 Truck Mazda B3000 Truck 2 Wheel Drive 4 Piece Set Suspension Kit for Models with Front Coil Spring Suspension
1998-2004Mazda B4000 Truck Mazda B4000 Truck 2 Wheel Drive 4 Piece Set Suspension Kit for Models with Front Coil Spring Suspension

This part replaces:

  • Hollander 511-01064R
  • Hollander 511-01065L
  • OE # 1F7134211
  • OE # 1F7135211
  • OE # 3L5Z3084DA
  • OE # 3L5Z3085DA
  • OE # 6L5Z3084BA
  • OE # 6L5Z3085BA
  • OE # F87Z3050BA
  • OE # L5Z3085BA
  • OE # MCS0E30
  • OE # MCS0E31
  • Dorman 520-237
  • Dorman 520-238
  • OE # 6L5Z3085BA, 3L5Z3085DA, 1F7135
  • OE # 6L5Z3084BA, 3L5Z3084DA, 1F7134
  • Moog K8771T
  • Moog K80054
  • Moog K80052
Part #: 1ASFK01231


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(13:53 min)