Specifications:

  • Brand New Suspension Kit
  • Comes as a Set of 4
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front CV Axles
  • Kit Includes: (2) Front Hub Assemblies
  • Quantity: 4 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove wheel. (1:13)
    • While your car is still on the ground, use your socket to loosen and remove the center hub nut.
    • Loosen your lug nuts and jack up the car.
    • Remove the lug nuts with your socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the brakes (1:25)
    • Raise and secure your car.
    • Remove the two bolts, pull off the caliper and then the rotor.
  3. step : Remove hub (3:50)
    • Remove the T55 torx bolts.
    • Spray the backs with penetrating oil to help.
    • Separate the hub from the backing plate.
    • Clean up with a wire brush.
    • Remove the hub nut.
    • Tap the axle with a hammer to loosen it and then use the hammer to hammer the hub off the axle.
  4. step : Replace hub (5:20)
    • Clean up the steering knuckle with a wire brush.
    • Use some anti-seize or penetrating oil to make future hub replacement easier.
    • Put position your new 1A Auto hub in place.
    • Secure the T55 torx bolts and nuts and tighten to 60 ft lbs.
    • Put the hub nut back on.
  5. step : Put brakes and wheel back on (7:40)
    • For more detailed instructions on reassembling the brakes consult our other videos.
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten the hub nut to 144 ft lbs.
    • Tighten the lugs to 75 ft lbs.

Tools needed for replacement:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • General Tools

  • Floor Jack
  • Jack Stands
  • Large Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 30mm Socket

  • Torx Drivers & Sockets

  • T55 Torx Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
chevy axle replacements
Every thing was good but one axle doesn't fit and you don't have another in stock just waiting but all in all it's all Good
September 15, 2017
Purchased
11 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1995-2001Chevy Cavalier Chevy Cavalier 3 Speed Automatic Transmission Suspension Kit 4 Piece Set
1995Pontiac Sunfire Pontiac Sunfire Automatic Transmission Suspension Kit 4 Piece Set
1996-2001Pontiac Sunfire Pontiac Sunfire 3 Speed Automatic Transmission Suspension Kit L4 2.2L 4 Piece Set

This part replaces:

  • A1 Cardone 66-1223
  • A1 Cardone 66-1224
  • Dorman 4110317
  • Hollander 538-00235
  • OE # 7470014
  • Reference Number Axle 56A
  • Reference Number Axle 57A
  • Dorman 951-023
  • Reference Number 513017K
Part #: 1AAHK00029

Out of Stock

How-to Video:

(09:45 min)