Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

Specifications:

  • Comes as a Pair
    • Fits LH (Driver Side) or RH (Passenger Side) Rear
  • Direct replacements
  • Built to strict quality control standards

 

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:30)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:06)
    • Use an 18mm wrench to hold the stud in place
    • Use a 15mm socket with a ratchet to untighten the nut
    • Repeat the process for the other end of the link
    • Pull out one end of the link
    • Twist it around, then pull of the other end
  3. step : Reinstalling the Sway Bar Link (2:31)
    • Insert one end of the link
    • Insert the other end
    • Hand tighten the nuts on both ends
    • Use a 14mm wrench to hold the stud
    • Use a 15mm socket and ratchet to tighten the nuts
    • Torque the nuts to 23 ft-lbs
  4. step : Reinstalling the Wheel (4:16)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 90 foot-pounds in a crossing or star pattern
  5. step : Reinstalling the sway bar link (2:31)
    • Insert one end of the link
    • Insert the other end
    • Hand tighten the nuts on both ends
    • Use a 14mm wrench to hold the stud
    • Use a 15mm socket and ratchet to tighten the nuts
    • Torque the nuts to 23 ft-lbs
  6. step : Reinstalling the wheel (4:16)
    • Put the wheel back on the car
    • Thread on the lug buts by hand
    • Use a 19mm socket to tighten them as much as possible while off the ground
  7. step : Lowering the vehicle (4:31)
    • Use the jack to take the vehicle off the jack stands
    • Lower the car to the ground
  8. step : Torque down the lug nuts (4:34)
    • Torque the lug nuts to 90 ft-lbs in a star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench
  • 18mm Wrench

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Quality and service.
I ordered these online and had them in hand in three days. The quality and fit for both the front & rear links were outstanding, well built & solid as OEM parts. and, the parts were well protected in shipping. Good product with good service! A+ would buy from them again and recommend to a friend.
November 14, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2003-2008Subaru Forester Subaru Forester Rear Sway Bar Link Pair
2004-2007Subaru Impreza WRX STi Subaru Impreza WRX STi Rear Sway Bar Link Pair
Part #: 1ASFK02511


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:24 min)