Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Rear Sway Bar Links
  • Kit Includes: (2) Front Lower Ball Joints
  • Quantity: 6 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:30)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:06)
    • Use an 18mm wrench to hold the stud in place
    • Use a 15mm socket with a ratchet to untighten the nut
    • Repeat the process for the other end of the link
    • Pull out one end of the link
    • Twist it around, then pull of the other end
  3. step : Reinstalling the Sway Bar Link (2:31)
    • Insert one end of the link
    • Insert the other end
    • Hand tighten the nuts on both ends
    • Use a 14mm wrench to hold the stud
    • Use a 15mm socket and ratchet to tighten the nuts
    • Torque the nuts to 23 ft-lbs
  4. step : Reinstalling the Wheel (4:16)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 90 foot-pounds in a crossing or star pattern
  5. step : Reinstalling the sway bar link (2:31)
    • Insert one end of the link
    • Insert the other end
    • Hand tighten the nuts on both ends
    • Use a 14mm wrench to hold the stud
    • Use a 15mm socket and ratchet to tighten the nuts
    • Torque the nuts to 23 ft-lbs
  6. step : Reinstalling the wheel (4:16)
    • Put the wheel back on the car
    • Thread on the lug buts by hand
    • Use a 19mm socket to tighten them as much as possible while off the ground
  7. step : Lowering the vehicle (4:31)
    • Use the jack to take the vehicle off the jack stands
    • Lower the car to the ground
  8. step : Torque down the lug nuts (4:34)
    • Torque the lug nuts to 90 ft-lbs in a star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench
  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2003-2008Subaru Forester Subaru Forester 6 Piece Set Suspension Kit
2004-2007Subaru Impreza WRX STi Subaru Impreza WRX STi 6 Piece Set Suspension Kit

This part replaces:

  • Moog K750041
  • Moog K9513
  • Moog K750049
  • Beck Arnley 101-5179
  • OE # 20470SA001; 20470SA000
  • OE # 20470SA011
  • OE # 21067GA050
Part #: 1ASFK05249


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:24 min)