Part Details
-
Brake Pad Bonding Type:
Premium Posi
-
Brake Pad Friction Material:
Ceramic
-
Brake Rotor Coating:
Premium E-Coated
-
Kit Includes:
(2) Rear E-Coated Brake Rotors
(1) Rear Ceramic Brake Pad Set
-
Rear Brake Rotor Specifications:
Vented
5 Lug
11.26 in. (286mm)
-
Brake Pad Features & Benefits:
OE Grade Multi-Layer Shim
Positive Mold Technology
Environmentally Compliant
Thermal Scorched
Brake Pad Specifications:
- 4 Piece REAR Brake Pad Set
- Direct replacement
- Premium Posi CERAMIC Disc Brake Pads
Brake Rotor Specifications:
- Comes as a PAIR
- Fits both LH (Driver Side) & RH (Passenger Side) REAR
- Fits 5 Lug Wheels
- Vented
- 11.25" (286 mm) Diameter
Premium Electrostatic Coated Brake Rotor Features and Benefits:
Electrostatically applied finish on both sides of the rotor hat and rotor edge for long lasting corrosion protection.
Uniform coating without any overspray.
Enhanced appearance.
Designed to withstand 400 hours of saltwater exposure without rusting.
Mill balanced and double-disc ground friction surface provides smooth braking and longer pad life. Premium Positive Molded Brake Pads Features and Benefits:
- The very same manufacturing process the original equipment manufacturers use
- High density friction material for long pad life
- Less resin content virtually eliminates brake fade and glazing
- Reduced dusting for both Ceramic and Semi-metallic materials
- Quality multi-layered shims and pad chamfering provide smooth and quite braking
100% CNC-Machined to Exact OE SpecsBalanced to reduce vibration.
Cast from OE Grade AlloyManufactured from OE Grade G3000 Casting Alloy.
Non-Directional Surface FinishHelps ensure smoother, quieter, and more effective braking.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.
-
step : Removing the Wheel (0:25)
- Loosen the 19mm lug nuts with the vehicle on the ground
- Raise the vehicle with a floor jack
- Secure the vehicle on jack stands
- Remove the lug nuts
- Pull off the wheel
-
step : Removing the Rear Brake Pads (0:56)
- Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
- Remove the 14mm slide pin bolts from the brake caliper
- Pull the caliper aside
- Pry the brake pads off with a flat blade screwdriver
- Remove the brake pad slides
-
step : Removing the Rear Brake Rotor (2:27)
- Remove 14mm bolts from the brake caliper bracket
- Pull off the brake caliper bracket
- Pull the rotor off
- If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
- Or thread M10 bolts into the rotor slot to loosen it
-
step : Preparing the New Rear Brake Pads and Rotors (5:27)
- Clean the brake pad slides with a wire brush and brake parts cleaner
- Apply grease to the caliper slides
- Clean the rotor with brake parts cleaner
-
step : Installing the New Rear Brake Rotor (6:42)
- Slide the rotor on
- Apply the adjustor wheel to turn the parking brake shoes in
- Put the caliper bracket back into place
- Place copper anti-seize on the 14mm bracket bolts
- Tighten the 14mm bolts
-
step : Installing the New Brake Pads (8:42)
- Place brake grease on the brake pad tab
- Install the new brake pads into the bracket
- Put the caliper on
- Tighten the slide pin 14mm bolts
-
step : Reattaching the Wheel (10:51)
- Slide the wheel into place
- Start the lug nuts by hand
- Tighten the lug nuts preliminarily
- Lower the vehicle to the ground
- Tighten the lug nuts to 89 foot-pounds in a crossing or star pattern
-
step : Testing the Brakes (11:25)
- Pump your brakes repeatedly until they feel firm
- Hold the button and maneuver the emergency brake handle up and down until there is resistance
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Who manufactures this kit?
J M
August 5, 2017
Nakamoto but made in China. The 2006 kit works great
S O
August 6, 2017
