Replaces

Subaru Legacy Outback Brake Kit Nakamoto MD1114, 31403 - 1ABFS00535

This rear brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Professional Grade SEMI-METALLIC Disc Brake Pads
  • 4 Piece REAR brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a PAIR
  • Fits LH (Driver Side) & RH (Passenger Side) REAR
  • Direct replacements
  • Fits 5 Lug wheels
  • 10.75" (274 mm) Diameter
  • Replaces dealer part numbers: 26700AG01A, 26700 AG01A, 26700AG01B, 26700 AG01B

This rear brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:25)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Rear Brake Pads (0:56)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove the 14mm slide pin bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  3. step : Removing the Rear Brake Rotor (2:27)
    • Remove 14mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
    • Or thread M10 bolts into the rotor slot to loosen it
  4. step : Preparing the New Rear Brake Pads and Rotors (5:27)
    • Clean the brake pad slides with a wire brush and brake parts cleaner
    • Apply grease to the caliper slides
    • Clean the rotor with brake parts cleaner
  5. step : Installing the New Rear Brake Rotor (6:42)
    • Slide the rotor on
    • Apply the adjustor wheel to turn the parking brake shoes in
    • Put the caliper bracket back into place
    • Place copper anti-seize on the 14mm bracket bolts
    • Tighten the 14mm bolts
  6. step : Installing the New Brake Pads (8:42)
    • Place brake grease on the brake pad tab
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Tighten the slide pin 14mm bolts
  7. step : Reattaching the Wheel (10:51)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 89 foot-pounds in a crossing or star pattern
  8. step : Testing the Brakes (11:25)
    • Pump your brakes repeatedly until they feel firm
    • Hold the button and maneuver the emergency brake handle up and down until there is resistance

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner
  • Copper Anti-Seize
  • Anti-Seize Grease
  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
THe videos are life saving. I use them a lot. But I could find a video on 08 subaru outback rear brakes. Still #1 on my list!
March 19, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005 Subaru Legacy (excluding Turbo Models) Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2006-2009 Subaru Legacy (excluding GT Models) (excluding Turbo Models) Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2005-2009 Subaru Outback Rear Premium Posi Semi-Metallic Brake Kit Nakamoto

This part replaces:

  • Nakamoto MD1114, 31403
Part #: 1ABFS00535


Nakamoto
Brand #: MD1114, 31403

How-to Video:

(12:24 min)