Replaces

Subaru Legacy Legacy Outback Lighting Kit - 1ALHT00099

Specifications:
  • Brand New Lighting Kit
  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Handling the Bulbs (0:47)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : To change just the headlight bulbs (0:56)
    • Open the hood.
    • Unclip the retaining wire.
    • Remove the bulb.
    • Replace bulb and clip in retaining wire.
  3. step : Remove the parking light assembly (2:17)
    • Remove the Phillip's screw securing the parking light assembly
    • Use a flat head screwdriver and a rag to pry out the parking light assembly
  4. step : Remove the grille (3:17)
    • Use pliers to remove the clips and the grille.
    • Set aside.
  5. step : Remove the head light assembly (4:17)
    • Unbolt the four bolts using your 10 mm socket and ratchet
  6. step : Install the new head light assembly (4:54)
    • Bolt the four 10 mm bolts back in using your socket and ratchet.
  7. step : Replace front grille (5:15)
    • Clip the grille back in.
  8. step : Re-install the parking light assembly (5:40)
    • Clip the parking light assembly back in
    • Screw in the screw using your Phillip's screwdriver

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Wrenches - Metric

  • 10mm Wrench

4.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
1
0
0
0
Great replacement
I used these to replace my stock headlights. after a while cleaning them did not work for very long. The replacements fit right in and are in my opinion better than the stock headlights.
January 23, 2017
Purchased
1 year ago
Lite
Pricey multi fit only require slight modifications Not a lot to choose from so take what you can get and
March 9, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997 Subaru Legacy (Built After 5/97 Production Date) 4 Piece Set Lighting Kit
  • 1998-1999 Subaru Legacy 4 Piece Set Lighting Kit
  • 1997 Subaru Legacy Outback (Built After 5/97 Production Date) 4 Piece Set Lighting Kit
  • 1998-1999 Subaru Legacy Outback 4 Piece Set Lighting Kit

This part replaces:

  • OE # 84001AC232
  • OE # 84001AC222
  • Partslink SU2502103
  • Partslink SU2503103
Only 3 left in stock
Part #: 1ALHT00099



How-to Video:

(07:11 min)