Replaces

Subaru Legacy Legacy Outback Corner Light Pair Front - 1ALPP00435

These replacement parking turn signal lights are just what you need to get your vehicle in good looking form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
    • Fender mounted
  • Replaces dealer part numbers: 84101-AC040, 84101-AC050, 84101AC040, 84101AC050
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Includes lenses and housings

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Handling the Bulbs (0:47)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : To change just the headlight bulbs (0:56)
    • Open the hood.
    • Unclip the retaining wire.
    • Remove the bulb.
    • Replace bulb and clip in retaining wire.
  3. step : Remove the parking light assembly (2:17)
    • Remove the Phillip's screw securing the parking light assembly
    • Use a flat head screwdriver and a rag to pry out the parking light assembly
  4. step : Remove the grille (3:17)
    • Use pliers to remove the clips and the grille.
    • Set aside.
  5. step : Remove the head light assembly (4:17)
    • Unbolt the four bolts using your 10 mm socket and ratchet
  6. step : Install the new head light assembly (4:54)
    • Bolt the four 10 mm bolts back in using your socket and ratchet.
  7. step : Replace front grille (5:15)
    • Clip the grille back in.
  8. step : Re-install the parking light assembly (5:40)
    • Clip the parking light assembly back in
    • Screw in the screw using your Phillip's screwdriver

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997 Subaru Legacy Front Corner Light Pair (Built After 5/97 Production Date)
  • 1998-1999 Subaru Legacy Front Corner Light Pair
  • 1997 Subaru Legacy Outback Front Corner Light Pair (Built After 5/97 Production Date)
  • 1998-1999 Subaru Legacy Outback Front Corner Light Pair

This part replaces:

  • OE # 84101AC050
  • OE # 84101AC040
  • Partslink SU2531103, SU2530103
Only 3 left in stock
Part #: 1ALPP00435

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(07:11 min)