Replaces

Subaru Legacy Legacy Outback Corner Light - 1ALPK00870

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement parking turn signal light is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits LH (Driver Side)
    • Fender mounted
  • Replaces dealer part number: 84101-AC050, 84101AC050
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Includes lens and housing

 

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Handling the Bulbs (0:47)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : To change just the headlight bulbs (0:56)
    • Open the hood.
    • Unclip the retaining wire.
    • Remove the bulb.
    • Replace bulb and clip in retaining wire.
  3. step : Remove the parking light assembly (2:17)
    • Remove the Phillip's screw securing the parking light assembly
    • Use a flat head screwdriver and a rag to pry out the parking light assembly
  4. step : Remove the grille (3:17)
    • Use pliers to remove the clips and the grille.
    • Set aside.
  5. step : Remove the head light assembly (4:17)
    • Unbolt the four bolts using your 10 mm socket and ratchet
  6. step : Install the new head light assembly (4:54)
    • Bolt the four 10 mm bolts back in using your socket and ratchet.
  7. step : Replace front grille (5:15)
    • Clip the grille back in.
  8. step : Re-install the parking light assembly (5:40)
    • Clip the parking light assembly back in
    • Screw in the screw using your Phillip's screwdriver

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1997Subaru Legacy Subaru Legacy (Built After 5/97 Production Date) Front Corner Light Driver Side
1998-1999Subaru Legacy Subaru Legacy Front Corner Light Driver Side
1997Subaru Legacy Outback Subaru Legacy Outback (Built After 5/97 Production Date) Front Corner Light Driver Side
1998-1999Subaru Legacy Outback Subaru Legacy Outback Front Corner Light Driver Side
Part #: 1ALPK00870


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:11 min)