Replaces

Subaru Legacy Legacy Outback Complete Cat Back Exhaust System - 1AEMK00043

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • Includes:
    • (1) - Intermediate Resonator Pipe
    • (1) - Rear Muffler
    • (2) - Gaskets
    • (1) - Spring & Bolt Kit
  • Replaces all components behind the converter
  • Direct fit replacements
  • Installs & fits just like the factory exhaust
  • No modifications necessary
  • Built to strict quality control standards
  • Replaces dealer part number: 44205AC010, 44205AC020, 44022AA210, 44022AA211, 44011AC000, 44205 AC010, 44205 AC020, 44022 AA210, 44022 AA211, 44011 AC000, 44305AC360, 44305AC410, SOA8376700, 44305 AC360, 44305 AC410, SOA83 76700
  • Does not include rear muffler flange hardware

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Due to the nature and size, exhaust parts may incur minor dents or scratches from handling and load shifting during shipping. These damages do not affect the fit or function of the part. Neither our 60 Day satisfaction guarantee, nor the manufacturer's warranty, cover these insignificant damages.

  1. step : Removing the Tailpipe and Muffler (1:22)
    • Lift the car.
    • Spray rust penetrant on the two nuts at the end of the tailpipe.
    • Remove the 9/16 bolts from the end of the tailpipe with the socket and wrench.
    • Use a screwdriver to pry the end of the tail pipe free.
    • Put the bolts back in without the nuts.
    • Push the hangers off of the muffler. Pull the bolts out and pull the muffler and tailpipe free.
  2. step : Installing the New Muffler and Tailpipe (4:28)
    • Spray rust penetrant on the hangers and bolts.
    • Put the tailpipe hanger on first.
    • Put the muffler hangers in place.
    • Put the bolt through and hang the gasket on the bolt.
    • Twist the gasket up into place and insert the other bolt.
    • Line the tail pipe onto the bolts and thread the nuts.
    • Tighten the nuts making sure the gasket stays centered. Tighten to 25 - 30 ft/lbs.

Tools needed for replacement:

    General Tools

  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - SAE

  • 9/16 Inch Socket

  • Wrenches - SAE

  • 9/16 Inch Wrench

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
saved alot over shop estimates
Fit like a glove,assembled first and had good hangers on car.Put the car on 4 jack stands and after hanging the rear ,jacked the resinator up to mate with the cat.converter.Drew the flanges together with a welding tong,bolted it up and checked clearances. Done.I do whish the kit contained muffler to mid pipe bolts,lock nuts and washers.That was my only complaint.Check your rubber hangers before you start if the car you are working on is your only transportation.
August 29, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1996-1997Subaru Legacy Subaru Legacy LSI Wagon Complete Cat Back Exhaust System H4 2.5L
1996Subaru Legacy Subaru Legacy GT Wagon Complete Cat Back Exhaust System H4 2.5L Manual Transmission (Built Before 5/96 Production Date)
1996Subaru Legacy Subaru Legacy GT Wagon Complete Cat Back Exhaust System H4 2.5L Automatic Transmission with
1997Subaru Legacy Subaru Legacy GT Wagon Complete Cat Back Exhaust System H4 2.5L (Built Before 4/97 Production Date) Automatic Transmission with
1996Subaru Legacy Outback Subaru Legacy Outback Complete Cat Back Exhaust System H4 2.5L
1996Subaru Legacy Outback Subaru Legacy Outback Complete Cat Back Exhaust System H4 2.2L
1997Subaru Legacy Outback Subaru Legacy Outback Complete Cat Back Exhaust System H4 2.5L Automatic Transmission with
1997Subaru Legacy Outback Subaru Legacy Outback Complete Cat Back Exhaust System H4 2.2L Automatic Transmission with
Part #: 1AEMK00043

Out of Stock

How-to Video:

(07:16 min)