1ASHS00414-Subaru Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set

Replaces

Subaru Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ

1ASHS00414

Part Details

  • Bearing Type: Ball Bearing
  • Set Quantity: 2 Piece

This part replaces:

  • TRQ BHA53539
  • OE # 28373AG00A
  • OE # 28373AG00B
  • OE # 28373AG01A x2
FREE SAME DAY SHIPPING
Save 28%
List: $138.95 Save: $39.00
Part 1ASHS00414
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BHA53539

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Set Quantity:   2 Piece
  • Bearing Type:   Ball Bearing

Precision Engineered

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.
100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement

Guaranteed to fit and function correctly for your specific application.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

BHA54042 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (0:31)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Front Brakes (2:00)
    • Have a drain pan and bleeder hose ready
    • Remove the rubber boot from the bleeder screw
    • Loosen the bleeder screw with a 10mm wrench and confirm fluid drips out
    • Apply a brake hose to the bleeder screw
    • Slowly pry the brake pads into the caliper to compress the pistons
    • Tighten the bleeder screw
    • Remove 14mm bolts from the brake caliper
    • Remove the brake caliper and hang it on a caliper hanger
    • Pry the brake pads off with a flat blade screwdriver
    • Remove 17mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
  3. step : Removing the Wheel Hub (12:02)
    • Bring the vehicle closer to the ground
    • Secure the hub with a pry bar
    • Remove the 32mm axle nut
    • Raise the vehicle
    • Tap the end of the axle out of the hub with a hammer and a punch
    • If the axle won't break free, unclip the ABS wire from the strut and remove the lower 19mm strut bolts
    • Remove the 14mm bolts behind the wheel hub
    • Tap the top of the wheel hub with a hammer if needed
    • Remove the wheel hub
  4. step : Installing the Wheel Hub (24:08)
    • Scrape off debris and brake parts cleaner and a wire brush
    • Coat the knuckle cavity, axle splines, and hub mating surface with anti-seize
    • Tighten the 32mm axle nut by hand
    • Attach the backing plate and wheel hub
    • Tighten the four 14mm bolts to the wheel hub
    • Torque the bolts to 48 foot-pounds
    • Tighten the lower 19mm strut bolts
    • Torque the lower strut bolts to 114 foot-pounds
    • Clip the ABS wire to the strut
    • Bring the vehicle closer to the ground
    • Secure the hub with a pry bar
    • Tighten the 32mm axle nut
    • Torque the nut to 162 foot-pounds
    • Raise the vehicle
    • Tap the nut into the axle slot with a hammer and punch
  5. step : Installing the Front Brakes (43:47)
    • Put the bracket back into place
    • Start the 17mm bolts by hand
    • Tighten the bolts to 88 foot-pounds of torque
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread 14mm bolts by hand
    • Tighten bolts to 20 foot-pounds
  6. step : Bleeding the Brakes (49:26)
    • Pump the brake pedal slowly a few times with a pry bar until it is firm
    • Check the master cylinder and add the manufacturer's specified brake fluid with a funnel as needed
    • Loosen the bleeder screw with a 10mm wrench
    • Let the fluid drip and inspect it for air bubbles
    • Tighten the bleeder screw
    • Have an assistant press the brake pedal slowly 3-5 times
    • One the last press, hold the panel
    • Loosen the bleeder screw with a 10mm wrench until the fluid seizes
    • Repeat this process until all air bubbles are out of the system
    • Replace the bleeder screw cap
  7. step : Reattaching the Wheel (50:50)
    • Remove the lug nut from the rotor
    • Slide the wheel into place
    • Attach the hub cap
    • Start the 19mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle partially to the ground
    • Torque the lug nuts to 88 ft-lb in a crossing or star pattern
    • Lower the vehicle completely

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 32mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 14mm Wrench
  • 17mm Wrench
  • 19mm Wrench
  • 10mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Will these fit a 2000 Subaru legacy wagon?
Tyler D June 25, 2018
This part is not listed to fit your vehicle. We may have a part that is listed to fit! Please search our site using your vehicle info and then choose the appropriate category. All the parts we carry are guaranteed to fit the vehicle they are listed for. Thank you!
Adam G June 25, 2018
Im not positive it should
Danny S June 26, 2018
Do they have the abs sensors?
Donald L November 15, 2018
Thank you for reaching out to us. The wheel hubs will not have the sensors but the axles will come with the ABS tone ring.
Corey M November 20, 2018
Do these bearings have the abs ring in them?
Todd H March 22, 2019
This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit.
Peter L March 23, 2019
Does it come with new axle nuts?
C L September 28, 2019
This part does not come with new axle nuts. If needed, you should be able to purchase them locally. Thank you for the inquiry!
Andra M October 2, 2019
Where are these bearing assemblies manufactured?
Robert P June 10, 2020
1A Autos house brand parts are manufactured by various aftermarket companies specifically for us and built to your vehicles exact OEM specifications. Please let us know if you have any other questions.
Adam G June 11, 2020
Will these fit a Legacy GT Limited? Only asking since a lot of other parts have said not for turbo models.
Jenny G August 10, 2020
Thank you for you question, Jenny. As long as you have a 2005-2014 Legacy these will be the correct front hubs! Please let us know if you have any other questions.
Tim K August 10, 2020

Fits the following Makes:

Year Make Model Description
2009-2014Subaru Forester Subaru Forester Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set
2008-2014Subaru Impreza Subaru Impreza Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set
2008-2014Subaru Impreza Subaru Impreza WRX Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set
2005-2014Subaru Legacy Subaru Legacy Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set
2005-2014Subaru Outback Subaru Outback Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set
2013-2014Subaru XV Crosstrek Subaru XV Crosstrek Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set

Part Interchange

Brand Label Part Number
Beck / Arnley 051-6251
Beck/Arnley 051-6251
Centric Parts 40147001
Chicago Rawhide BR930473
Drive Tech America NT513220
GMB 799-0299
MOOG Hub Assemblies 513220
Raybestos 713220
Raybestos Brakes 713220
SKF BR930473
Subaru 28373-AG01B
Subaru 28373-AG01A
Subaru 28373-AG00B
Subaru 28373-AG00A
Timken HA590118

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: BHA53539
Product Reviews
4.67/ 5.0
33 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
27
4
0
1
1
Subaru Forester front hubs
We bought the kit for the value. 2009 Forester, east coast so a little rust on everything. Tough to remove. We created a slide hammer by using a 5/8" all-thread, some large plate washers with nuts and a 35 lb. plate from a weight lifting set as the slide. Needless to say it finally gave way cleanly. Thanks 1A.
April 24, 2017
Ft. wheel bearings
Just installed both front wheel bearings yesterday in my 05 Outback. Install was sraight forward and bearings were perfect fit. Finally have a quiet ride again. Good product at a reasonable price. Thanks 1A Auto.
February 15, 2018
Best Value
First of all I like to buy here 1A, easy payment and fast shipping. The part is good quality with good price. I am so happy with my order and near future Ill order more parts. Thank you 1A
March 14, 2018
Front Wheel Bearings
I purchased these front wheel bearings for my 2005 Subaru Outback when one of them failed. I purchased two because you never know when another will fail. The bearings came when expected and with the help of 1A Auto video the parts were replaced with ease. Since my purchase, the new bearings have over 1,000 miles on them and everything is working as expected.
May 25, 2018
VERY GOOD QUALITY AT CHEAP PRICING!!!
Fitment: 100% quality: 100% customer service: 100% Pricing:100% will buy only from you guys!
August 27, 2018
Fits perfect - 2014 WRX Sedan premium
I drove for so long with a bad wheel bearing that after I installed these I almost forgot what my car sounded like before it went bad. I replaced the front pair for peace of mind. I replaced these at my friends work and we got them done because I know I didnt have certain tools. Once I got old ones out these fit right in and had no issues. Pay attention to dust shield when you put the new ones in. Car is running good now!
October 4, 2018
Better prices
Thought I was going to be in trouble parts store listed for $125.0 for a single rotor so glad 1aauto had a pair for only $86.0 saved me plenty and got my car going again
November 9, 2018
Great Product
Easy to install and no problems so far. It only took my two hours to install. I would definitely buy something again from this website.
December 4, 2018
Parts and customer service
I have not installed them yet. But I have always gotten quality parts from here and shipped in a timely manner. And as far as warranty issues, no hassle in returns.
February 5, 2019
Perfect!
Ive bought parts from this website for awhile. Parts are geat with prices, durable, and the descriptions are on point. I was able to fix my 05 Suby Outback with ease. Cant wait for their store/ website to grow some more. Thank you 1AAUTO????
February 19, 2019
Hub assembly
Easy to install no hastle what so ever well give another riview 6 months from now
March 2, 2019
Perfect drop in fit!
Ordered these for my Subaru, and they arrived just after 3 days! Quality components, zero rust (so they havent been sitting on a shelf forever, or if they have, theyve been properly preserved with an oil), no slop and no fitment problems. Absolutely recommend 1A Auto for price conscious, or professional quality replacement parts/assemblies.
April 4, 2019
Was excited for a great price and warranty but...
This is my 1st purchase through the site and I must say Im a little disappointed. A friend referred me to the site because of the great prices and free shipping. I purchased the hub assembly because my wheel bearing was starting to show signs of failure (typical howling). At 1st glance the new assembly seemed like it was a great quality replacement. Everything went together very easily and fit perfectly but thats where the positives stop. After torquing everything down I hit the road towards home as I was using a friends lift to make the job easier. As soon as I was on the road I knew something was terribly wrong, I instantly heard the noise of a wheel bearing nearing catastrophic failure. I parked the car and there it sits till I get a new hub assembly. I called customer support immediately. The person I talked to was very helpful and offered to send out a replacement immediately. I only wish that it was shipped "next day" so I could have fixed it sooner instead of having to borrow a car so I can get to work. Hopefully the replacement is flaw free...
April 20, 2019
Seem like quality parts
Both hubs came brand new, with magnetic lining on the back, which is important for ABS system to work properly. Very fast shipping – MAJOR PLUS!!!
April 29, 2019
Perfect
Parts fit well and my car is running smoothly
July 23, 2019
It’s amazing
Came in today’s easy to put on good to go
July 31, 2019
Subaru front hub assembly
The part was correct and fit with no problem,A1 has always been my suspension online parts store for the last 3 yrs great prices.
August 29, 2019
Great service
Ordered wheel bearings good price fast shipping and when I had a question customer service was excellent. Would definitely buy from again.
October 6, 2019
Perfect fit
I used these to replace the front bearings on my 2013 Forester. They are a perfect fit. Ive heard horror stories about the ABS sensors not working, but there was no problem with these TRQ bearings. Time will tell, but they seem to be very well made and a lifetime warranty gives me some peace of mind. The price, purchasing experience and fast shipping from 1A have made me a very satisfied customer.
October 9, 2019
Ordering my parts for my Subaru is easy
Love the fact that I can get my parts cheaper and faster. Also parts are good quality close to OEM. Plus helpful videos on how to do it right with correct torque specs. Wow!??
October 26, 2019
We will see
I got them installed, driven about a mile so far. Was replaced just in time, old ones were shot.
November 5, 2019
Perfect fit. Straight forward repair.
478 miles on repair. It is like having a new car. I did not realize how many noises were related to these 147000 mile hubs. The rear hub bolt patterns are slightly unique. If they dont line up; rotate 180 degrees and it will work. The front hubs alignment is pretty obvious. Removing the old hubs is a PIA! Steel shank screwdriver, steel wedge, 5 pound hammer and penetrating oil. As soon as disc is removed soak down seam of hub and bolts. You will have to do some metal reshaping of the brake shield when done.
January 11, 2020
Subaru New Front Wheel Bearings
Bought new front wheel bearings for my wifes 2008 Subaru Outback. Great price. Bearings arrived in two days very good packaging. My mechanic installed them, no problem and the car is running great. No more bearing noise!
February 6, 2020
Front wheel bearing for 2013 Subaru Outback
I was nervous about getting the parts and doing this myself. 1aauto made it easy. Great quality parts, at a great price. Sent right to my door in a timely matter. They also connect to a video they created specifically for you car and part you bought. Made it easy from choosing parts, buying and receiving, as well as changing the parts out. They literally an al around device. Thank you 1aauto.
March 2, 2020
Fantastic price a d service
Love that installation instructions were included!
March 12, 2020
Duration
The install was easy and they fit perfectly, but not even 1500 miles on them and Im having to replace them. If youre looking for a daily driver fix these work temporarily.
April 11, 2020
Subaru Front Wheel Bearing & Hub Assembly Pair
high quality perfect fit and super fast shipping
April 18, 2020
Fast prompted and accurate
unbelievable service. The web site and easy to navigate and the parts are right on.. Not only are the parts right on the prices are 10 times better then the neighborhood stores. 1aauto is the place to shop for all your parts needs.
April 23, 2020
Thank you!!
My item was delivered on time.was the correct part. Super easy to use tour website. I would totally tell anyone to use this company. I have nothing but good things to say.
June 20, 2020
Subaru bearings
Easy to install and car rides like new
June 23, 2020
Always a good experience.
As always it was easy to place the order and it arrived in a few days and was a perfect fit. The how to videos are great as well. Love 1a Auto.
June 26, 2020
Perfect fit
Fit my 13’ crosstrek just like oem. Will buy again if any other wheel bearings i have fail.
August 28, 2020
Product is definitely werth the money works great was easy to install. Its been on my car now for two month and its been working great. I highly recomend this part. Definitely werth the money
September 9, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Subaru Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ-1ASHS00414 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.