This replacement fog driving light is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits either the LH (Driver) or RH (Passenger) Sides
    • Bumper mounted
  • Replaces dealer part numbers: 84501-FJ000, 84501-FJ000
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Fog light does not include bulb or wiring
  • Does NOT fit WRX or STI models

This fog driving lamp is a great replacement and has good cost savings over a fog light from the dealer.

 

 

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Fog Light Lens (0:20)
    • Raise and support the vehicle
    • Remove the 10mm bolt from the side splash shield beneath the light
    • Pry out the clips with a trim clip tool
    • Disconnect the wiring harness
    • Remove the 10mm bolts from the light
    • Remove the light
  2. step : Installing the Fog Light Lens (1:57)
    • Insert the fog light into place
    • Tighten the 10mm bolts to the light
    • Connect the wiring harness
    • Line up the splash shield
    • Press in the push clips
    • Tighten the 10mm bolt to the splash shield

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Gloves

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2013-2016 Subaru BRZ Fog / Driving Light
  • 2012-2016 Subaru Impreza Fog / Driving Light Driver or Passenger Side
  • 2013-2016 Subaru XV Crosstrek Fog / Driving Light

This part replaces:

  • Partslink SU2592121
  • Hollander 116-60062
  • OE # 84501FJ000
  • TYC 19-6011-00-1
Only 5 left in stock
Part #: 1ALFL00648

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(04:44 min)