Brake Pad Specifications:

  • 4 Piece REAR Brake Pad Set
  • Direct replacement
  • Premium Posi CERAMIC Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Fits 5 Lug Wheels
  • Vented
  • 11.25" (286 mm) Diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Premium Electrostatic Coated Brake Rotor Features and Benefits:

  • Electrostatically applied finish on both sides of the rotor hat and rotor edge for long lasting corrosion protection.
  • Uniform coating without any overspray.
  • Enhanced appearance.
  • Designed to withstand 400 hours of saltwater exposure without rusting.
  • Mill balanced and double-disc ground friction surface provides smooth braking and longer pad life.
  • Positive Mold Technology

    Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

    OE Grade Multi-Layer Shim

    OE Grade Multi-Layer Shim helps reduce vibration and noise

    Environmentally Compliant

    Certified Environmentally Compliant to "Better Brake Law" standards

    Thermal Scorched

    Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

    100% CNC-Machined to Exact OE Specs

    100% CNC-Machined to exact OE specs and balanced to reduce vibration

    Cast from OE Grade Alloy

    Manufactured from OE Grade G3000 Casting Alloy

    Non-Directional Surface Finish

    Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

    Lifetime Warranty

    This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

    Wear and Tear

    This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

    1. step : Removing the Wheel (0:25)
      • Loosen the 19mm lug nuts with the vehicle on the ground
      • Raise the vehicle with a floor jack
      • Secure the vehicle on jack stands
      • Remove the lug nuts
      • Pull off the wheel
    2. step : Removing the Rear Brake Pads (0:56)
      • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
      • Remove the 14mm slide pin bolts from the brake caliper
      • Pull the caliper aside
      • Pry the brake pads off with a flat blade screwdriver
      • Remove the brake pad slides
    3. step : Removing the Rear Brake Rotor (2:27)
      • Remove 14mm bolts from the brake caliper bracket
      • Pull off the brake caliper bracket
      • Pull the rotor off
      • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
      • Or thread M10 bolts into the rotor slot to loosen it
    4. step : Preparing the New Rear Brake Pads and Rotors (5:27)
      • Clean the brake pad slides with a wire brush and brake parts cleaner
      • Apply grease to the caliper slides
      • Clean the rotor with brake parts cleaner
    5. step : Installing the New Rear Brake Rotor (6:42)
      • Slide the rotor on
      • Apply the adjustor wheel to turn the parking brake shoes in
      • Put the caliper bracket back into place
      • Place copper anti-seize on the 14mm bracket bolts
      • Tighten the 14mm bolts
    6. step : Installing the New Brake Pads (8:42)
      • Place brake grease on the brake pad tab
      • Install the new brake pads into the bracket
      • Put the caliper on
      • Tighten the slide pin 14mm bolts
    7. step : Reattaching the Wheel (10:51)
      • Slide the wheel into place
      • Start the lug nuts by hand
      • Tighten the lug nuts preliminarily
      • Lower the vehicle to the ground
      • Tighten the lug nuts to 89 foot-pounds in a crossing or star pattern
    8. step : Testing the Brakes (11:25)
      • Pump your brakes repeatedly until they feel firm
      • Hold the button and maneuver the emergency brake handle up and down until there is resistance

    Tools needed for replacement:

      General Tools

    • Large C-Clamp
    • Jack Stands
    • Wire Brush
    • Floor Jack

    • Materials, Fluids, and Supplies

    • Rust Penetrant
    • Brake Parts Cleaner
    • Copper Anti-Seize
    • Anti-Seize Grease
    • Cloth Rags

    • Pliers, Cutters & misc Wrenches

    • Adjustable Wrench

    • Ratchets & Related

    • Socket Extensions
    • Torque Wrench
    • Ratchet
    • 1/2 Inch Breaker Bar

    • Screwdrivers & Related

    • Flat Blade Screwdriver

    • Sockets - Metric

    • 19mm Socket

    • Wrenches - Metric

    • 14mm Wrench

    5.0 / 5.0
    1 Review
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Stars
    1
    0
    0
    0
    0
    2013 Subaru Outback 2.5i Limited Rear Brake set
    All parts were quality made and proper for the vehicle, would buy here again. Very fast shipping. Great customer support.
    July 17, 2017
    Purchased
    9 months ago
    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 1 question Browse 1 question and 1 answer
    Who manufactures this kit?
    J M on Aug 5, 2017
    BEST ANSWER: Nakamoto but made in China. The 2006 kit works great

    Vehicle Fit

    • 2009-2015 Subaru Forester Rear Premium Posi Ceramic Premium E-Coated Brake Kit
    • 2008-2014 Subaru Impreza H4 2.5L Rear Premium Posi Ceramic Premium E-Coated Brake Kit
    • 2008-2011 Subaru Impreza Outback Rear Premium Posi Ceramic Premium E-Coated Brake Kit
    • 2008-2014 Subaru Impreza WRX Rear Premium Posi Ceramic Premium E-Coated Brake Kit
    • 2010-2014 Subaru Legacy (excluding Turbo Models) Rear Premium Posi Ceramic Premium E-Coated Brake Kit
    • 2010-2014 Subaru Outback Rear Premium Posi Ceramic Premium E-Coated Brake Kit

    This part replaces:

    • OE # 26700FG000
    • OE # 26700 FG000
    • Reference Number CD1114
    Only 5 left in stock
    Part #: 1ABFS01768


    How-to Video:

    (12:24 min)