Part Details

  • Lighting Housing Shape: Round

This replacement fog driving light is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits RH (Passenger Side)
    • Bumper Mounted
  • Direct replacement ROUND Fog Light
  • Replaces dealer part number: 84501-AE10A, 84501AE10A
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Fog light does not include bulbs or wiring

This fog driving lamp is a great replacement and has good cost savings over a fog light from the dealer.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Servicing the Fog Light Bulbs (0:45)
    • Pry off the plastic clip with a flat blade screwdriver
    • Pull back the fog light panel
    • Twist the bulb counterclockwise and out
    • Disconnect the bulb from the wiring connector
    • Connect the new bulb to the wiring connector
    • Twist the bulb clockwise into the fog light
  2. step : Removing the Fog Light (2:11)
    • Remove the plastic 12mm nuts from the fog light
    • Apply penetrating oil to the two 10mm bolts in the fog light
    • Remove the two 10mm bolts
    • Disconnect the fog light wiring harness
    • Pull the fog light out from the front of the bumper
  3. step : Installing the New Fog Light (3:49)
    • Push the new fog light into place
    • Put on the plastic nuts
    • Insert the two 10mm bolts into the fog light
    • Connect the fog light wiring harness
    • Push the fog light cover into place
    • Insert the plastic clip into the fog light cover

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 12mm Wrench
  • 10mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2003-2005Subaru Baja Subaru Baja Round Fog / Driving Light Passenger Side
2000-2004Subaru Outback Subaru Outback Round Fog / Driving Light Passenger Side

This part replaces:

  • Partslink SU2593101
  • Hollander 116-59214R
  • DEPO 320-2007R-AF
  • OE # 84501AE10A
Part #: 1ALFL00155


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:26 min)