Specifications:

  • Brand New Mopar Strut Tower Brace
  • Powder Coated Steel construction
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Installing the Strut Brace (1:08)
    • Pull up the black plastic push tabs on the cowl panel
    • Remove the three 13mm strut bolts on both sides
    • Place the strut brace over the bolts
    • Jack up the front end with a jack
    • Start the 13mm nuts by hand
    • Lower the jack
    • Tighten the 13mm nuts
    • Torque the nuts to 30 foot-pounds
  2. step : Tightening the Strut Brace (3:41)
    • Place a paper towel beneath the brace
    • Drill a 13/32" space in the chassis brace under the cowl
    • Insert the bolts and a washer between the brace and chassis bar
    • Torque the bolt to 10 foot-pounds with a 7/32" or 5.5mm Allen Key
    • Press in the cowl panel clips

Tools needed for replacement:

    Allen Wrenches

  • 13/32 Inch Allen Wrench
  • 5.5mm Allen Wrench

  • Drills, Drill Bits & Related

  • Drill
  • 13/32 Drill Bit

  • Materials, Fluids, and Supplies

  • Gloves
  • Paper Towels

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 13mm Socket

  • Wrenches - Metric

  • 14mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(05:36 min)

Tools List:

    Allen Wrenches

  • 13/32 Inch Allen Wrench
  • 5.5mm Allen Wrench

  • Drills, Drill Bits & Related

  • Drill
  • 13/32 Drill Bit

  • Materials, Fluids, and Supplies

  • Gloves
  • Paper Towels

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 13mm Socket

  • Wrenches - Metric

  • 14mm Wrench



This part replaces:

  • Mopar P5155950
  • OE # P5155950
  • OE # P5155002

Vehicle Fit

  • 2005-2014 Chrysler 300 Front Steel Strut Tower Brace V8 5.7L Mopar P5155950
  • 2005-2010 Chrysler 300 Front Steel Strut Tower Brace V8 6.1L Mopar P5155950
  • 2008-2010 Dodge Challenger Front Steel Strut Tower Brace V8 6.1L without Shaker Hood Mopar P5155950
  • 2009-2015 Dodge Challenger Front Steel Strut Tower Brace V8 5.7L without Shaker Hood Mopar P5155950
  • 2006-2014 Dodge Charger Front Steel Strut Tower Brace V8 5.7L Mopar P5155950
  • 2006-2010 Dodge Charger Front Steel Strut Tower Brace V8 6.1L Mopar P5155950
  • 2005-2008 Dodge Magnum Front Steel Strut Tower Brace V8 5.7L Mopar P5155950
  • 2006-2008 Dodge Magnum Front Steel Strut Tower Brace V8 6.1L Mopar P5155950
Only 2 left in stock
Part #: MPSMX00003

Ships Same Day for orders placed by 4 P.M. ET

Brand #: P5155950

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More