These replacement Upper Strut Mounts are just what you need to get your vehicle riding great again!

Specifications:
  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT UPPER
  • Includes mounts & bearings
  • Direct replacements
  • Built to strict quality control standards
These upper strut mounts are great replacements and offer good savings over the dealer units.

Part Details

  • Location: Upper
  • Front or Rear Location: Front
  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (0:57)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel.
  2. step : Remove the strut (1:15)
    • Unbolt the 12 mm bolt securing the brake line.
    • Remove the 10 mm bolt securing the ABS sensor to the strut.
    • Use a breaker bar and penetrating oil to unbolt the 17 mm strut bolts on the bottom
    • Unbolt the 14 mm bolts at the top of the strut.
    • Pull the strut down and out.
  3. step : Install the new strut (3:06)
    • Pry up the top cover of the strut
    • Set up the spring compressors.
    • Switch back and forth between tightening the two spring compressors.
    • Start removing the 17 mm nut at the top of the strut
    • Continue to compress the spring and remove the nut completely.
    • From here you can replace the spring or the rubber bellows.
    • Replace the strut mount and tighten up the nut.
    • Decompress the spring.
    • Bolt the strut back in, torquing your 14 mm bolts to 20-30 ft lbs
    • Torque the bottom 17 mm nut to 100 ft lbs
    • Secure the 10 mm ABS sensor bracket nut with your socket and ratchet
    • Connect the brake line in place with your 12 mm socket and ratchet.
  4. step : Replace the wheel (8:25)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts to 100 ft lbs

Tools needed for replacement:

    Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 22mm Socket
  • 14mm Socket
  • 10mm Socket
  • 17mm Socket
  • 12mm Socket

  • Specialty Tools

  • Strut Spring Compression Tool

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1996-2006 Hyundai Elantra Front Upper Strut Mount with Bearing Pair
  • 1997-2001 Hyundai Tiburon Front Upper Strut Mount with Bearing Pair
  • 2005-2009 Kia Spectra Front Upper Strut Mount with Bearing Pair
  • 2005-2009 Kia Spectra 5 Front Upper Strut Mount with Bearing Pair

This part replaces:

  • OE # 5461029000
  • OE # 546102F000
  • Moog K9794
Part #: 1ASFK00353

Out of Stock

How-to Video:

(09:17 min)