In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Direct Fit

Direct fit replacement; not only will the part fit correctly, but it will function correctly.  Many competitors combine applications to cut down on the amount of parts they have to carry. This can result in the following issues: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

Pre-Assembled

Pre-assembled, loaded strut & spring assemblies allow for a quicker, safer install than replacing with just bare struts. 

Trouble-Free Install

Trouble-free install includes the matched parts needed to get the job done. New mounts, bearings, springs and hardware will provide a better ride for your vehicle and save you time from not having to do the job again because a used part failed afterwards.

Matched Parts

When you buy the kit pre-built by us, you can be sure that the parts are matched for optimum performance.  Not all shocks and struts are manufactured the same, so mixing and matching can result in fit issues and potentially decrease the life of the parts.

Saves Time & Money

When you buy one of our kits, you not only save money over buying the parts individually, but you also save time having to search for all of the different parts that are correct for your vehicle (because we did it for you!)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:13)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel.
  2. step : Remove the bottom of the shock (1:30)
    • Unbolt the 10 mm securing the ABS sensor to the strut.
    • Unbolt the two bottom bolts securing the shock.
    • Use a breaker bar and 24 and 21 mm sockets and some penetrating oil.
    • You might need a hammer to work the bolts out once you have removed the nuts.
    • Use a pry bar to pry the spindle free from the strut
  3. step : Remove the top of the strut (3:58)
    • Pop the hood and secure it.
    • Use your 13 mm socket and ratchet and some penetrating oil to remove the three nuts on the 10 mm bolts securing the top of the strut.
    • Pull the strut down and out.
  4. step : Install the new strut (3:38)
    • Work the strut into place and bolt in the top three 13 mm nuts
    • Torque the three 13 mm nuts to 20-25 ft lbs
    • Bolt in the bottom bolt and 24 mm nuts and torque to 120 ft lbs.
    • Fasten the ABS sensor to the strut using your 10 mm socket and ratchet.
  5. step : Replace the wheel (7:33)
    • Put the wheel back on and hand tighten the lug nuts
    • Lower the vehicle and torque the lug nuts to 100 ft lbs using a star pattern

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 24mm Socket
  • 21mm Socket
  • 19mm Socket
  • 13mm Socket
  • 10mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Awesome price
Parts got to me faster than said. Go quality and easy to install. 1a auto has great service and prices. Will use again.
February 19, 2018
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 3 answers
is item #1assp01027 a quick connect all in one strut?
Connie H on Dec 21, 2015
BEST ANSWER: Yes. I was able to change all four in my drive way. Be sure to get the vehicle aligned right after installation.
How much for just the Rear shocks?
Joe L on Jul 28, 2016
BEST ANSWER: Please call our service department with your vehicle information for an accurate price quote
888-844-3393

Vehicle Fit

  • 1991-1999 Buick LeSabre Front & Rear Strut Assembly 4 Piece Set without Air Suspension
  • 1992 Buick Park Avenue Front & Rear Strut Assembly 4 Piece Set without Air Suspension
  • 1991-1993 Cadillac Deville Front & Rear Strut Assembly 4 Piece Set without Air Suspension
  • 1991-1999 Olds 88 Front & Rear Strut Assembly 4 Piece Set without Air Suspension
  • 1991-1996 Olds 98 Front & Rear Strut Assembly 4 Piece Set without Air Suspension
  • 1991-1996 Olds 98-Regency Front & Rear Strut Assembly 4 Piece Set without Air Suspension
  • 1991 Olds Delta 88 Front & Rear Strut Assembly 4 Piece Set without Air Suspension
  • 1991-1999 Olds Delta 88-Royale Front & Rear Strut Assembly 4 Piece Set without Air Suspension
  • 1991-1999 Pontiac Bonneville Front & Rear Strut Assembly 4 Piece Set without Air Suspension

This part replaces:

  • Hollander 527-01023
  • Monroe 181822
  • Monroe 171822
  • KYB SR4022
Only 1 left in stock
Part #: 1ASSP01027


How-to Video:

(08:08 min)