Part Details

  • Quantity: 4 Piece Set

Direct Fit

Fits and functions correctly.  Competitors combine applications to reduce the amount of parts they carry, resulting in: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:59)
    • Loosen the lug nut covers with a 19mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Front Strut (1:30)
    • Spray the lower and higher strut bolts with penetrating oil
    • Remove the two of the upper 15mm strut bolts
    • Remove the two 21mm nuts from the bottom of the strut and knuckle
    • Hammer the bottom of the strut to loosen the bolts
    • Remove the nuts and hammer the bolts out
    • Pull the wheel knuckle forward and push the strut back
    • Remove the two of the upper 15mm strut bolt
    • Remove the rear shock strut
  3. step : Dissembling the Front Strut (3:10)
    • Spray the top bolt on the strut with penetrating oil
    • Place the spring compressors on either side of the spring
    • Tighten each back and forth a little while alternating sides
    • Remove the nut at the top of the strut with a strut socket and T47 Torx bit
    • Pull the mount plate from the top of the strut free
    • Remove the spring
    • Pull the boot up and off
  4. step : Assembling the Front Strut (5:07)
    • Push down on the strut and remove the packing clip
    • Remove the nut and pull the clip free
    • Hammer the clip on the old strut that holds the gasket
    • Place the gasket onto the new strut
    • Replace the boot
    • Insert the spring into its notch on the strut
    • Push the plate and mount onto the strut
    • Push down on the strut and insert a 47 Torx bolt
    • Loosen each of the compressors bit by bit while alternating sides
    • Repeat until the spring compressors pull free
  5. step : Inserting the Front Strut (6:51)
    • Insert the strut into place
    • Replace the upper 15mm strut bolts by hand
    • Push down on the knuckle and place the strut behind it
    • Push the strut onto the knuckle
    • Insert the 21mm bolts into the bottom of the strut and knuckle
    • Hammer the 21mm bolts in and tighten them
    • Torque the 21mm bolts to 130 ft/lbs
  6. step : Reattaching the Wheel (8:48)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Tighten the three 15mm bolts at the top of the strut
    • Tighten the lug nuts to 30 ft/lbs
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket

Tools needed for replacement:

    Allen Wrenches

  • 6mm Allen Wrench

  • General Tools

  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket
  • 21mm Socket

  • Specialty Tools

  • Strut Spring Compression Tool

  • Torx Drivers & Sockets

  • T47 Torx Socket

  • Wrenches - Metric

  • 18mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Great Price prefect fit !
Just what we order and my car rides like new again. Thank You great service.
December 11, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
What brand and or manufacturer are these struts ?
Michael B on Jul 30, 2016
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.

Vehicle Fit

Year Make Model Description
2005-2009Buick Allure Buick Allure Strut Assembly 4 Piece Set Front & Rear
1997-2005Buick Century Buick Century Strut Assembly 4 Piece Set Front & Rear
2005-2009Buick LaCrosse Buick LaCrosse Strut Assembly 4 Piece Set Front & Rear (excluding Super Models)
1997-2004Buick Regal Buick Regal Strut Assembly 4 Piece Set Front & Rear
2000-2006Chevy Impala Chevy Impala Strut Assembly 4 Piece Set Front & Rear
2007-2013Chevy Impala Chevy Impala Front & Rear Strut Assembly 4 Piece Set for Models with 16 Inch Wheels
2000-2007Chevy Monte Carlo Chevy Monte Carlo Strut Assembly 4 Piece Set Front & Rear
1997-2003Pontiac Grand Prix Pontiac Grand Prix Strut Assembly 4 Piece Set Front & Rear

This part replaces:

  • Monroe 71661
  • Monroe 71662
  • KYB 334227
  • KYB 344338
Only 4 left in stock
Part #: 1ASSP00210


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:34 min)